Operation Manual

- 95 -

Recording

∫ Setting the White Balance manually

Set the White Balance value. Use to match the condition when taking photographs.

1 Select [ ], [ ] and then touch [WHITE SET].

•

The White Balance setting screen can also be displayed by pressing the cursor button

toward 3.

2 Aim the camera at a sheet of white paper etc. so

that the frame in the centre is filled by the white

object only and then touch [SET].

Note

•

White Balance may not be set when the subject is too bright or too dark. Set the White Balance

again after adjusting to appropriate brightness.

∫ Setting the colour temperature

You can set the colour temperature manually for taking natural pictures in different lighting

conditions. The colour of light is measured as a number in degrees Kelvin. As the colour

temperature increases, the picture becomes more bluish. As the colour temperature

decreases, the picture becomes more reddish.

1 Select [ ] and then touch [WB K SET].

•

The colour temperature setting screen can also be

displayed by pressing the cursor button toward 3.

2 Touch the colour temperature setting bar.

•

It is also possible to set the values by touching [3]/[4]

or pressing

3/4 of the cursor button.

• You can set a colour temperature from [2500K] to

[10000K].

3 Touch [SET].