Operation Manual

Recording Menu Settings
68
VQT0P65
The shutter speed can be automatically
adjusted. However, if you want brighter
pictures, you can manually select a slower
shutter speed. This is especially effective if
you want to take pictures where both the
night landscape and the subject are bright,
using [NIGHT PORTRAIT] in scene mode
(P57).
The slow shutter speed values you can
select are: [1/8], [1/4 ], [1/2] and [1].
Example
Usually, set to [1/8 –] to take pictures.
(When you select slow shutter speed
values other than [1/8 ], [ ] appears
on the lower left of the LCD monitor.)
When you set shutter speed slower on
[SLOW SHUTTER], we recommend using
a tripod because jitters become easier to
occur.
You cannot set the slow shutter in
[NIGHT SCENERY] and [FIREWORKS] in
scene mode. (P57)
It is possible to further magnify a subject
already magnified 6 times with the optical
zoom 4 more times with the digital zoom,
thereby reaching a maximum of 24 times.
Entering the digital zoom range
When you rotate the zoom lever to the
extreme Tele position, the on-screen zoom
indication may momentarily pause. This is
not a malfunction.
You can enter the digital zoom range by
continuously rotating the zoom lever to Tele
or releasing the zoom lever once and then
rotate it to Tele again.
1 Optical zoom
2 Digital zoom
When using the digital zoom, the picture
quality becomes deteriorated.
In the digital zoom range, the stabilizer
function may not be effective.
We recommend using a tripod.
The indicated zoom magnification is an
approximation.
The AF area is displayed with a size wider
than usual and set only to a point on the
center of the screen in the digital zoom
range. (P67)
Slow Shutter
[SLOW SHUTTER]
Slow shutter
setting
1/8– 1–
Brightness Darker Brighter
Jitter Less More
SCN1
SCN
2
1/8 1
Digital Zoom
[D.ZOOM]
SCN1
SCN
2
W
W
T
T
LZ2_1PP.book 68 ページ 2005年1月14日 金曜日 午前7時56分