Owner manual

- 52 -
The hose located on the back of the
vacuum cleaner carries the dirt from
the nozzle up to the dust bag. If the
hose should become clogged:
➢ Unplug vacuum cleaner.
➢ Pull open suction inlet cover and
check for clogging.
➢ Disconnect wand from short hose
and check wand and hose.
➢ Plug in vacuum cleaner and turn on.
➢ Disconnect wand and stretch hose
in and out to remove clog.
➢ Turn off and unplug the vacuum
cleaner.
➢ Remove lower plate. See:
“Removing and Installing Lower
Plate” (page 44).
➢ Inspect inlet of nozzle hose and
clear any obstructions.
➢ Reinstall lower plate (page 44).
➢ Return the vacuum cleaner to the
upright position before plugging
into an electrical outlet.
Short Hose
Tuyau court
Manguera
corta
Hose
Tuyau
Manguera
Cover (Suction Inlet)
Couvercle (Entrée
d’aspiration)
Cubierta (Abertura
de aspiración)
Removing Clogs
Hose Inlet
Entrée du tuyau
Conección de
manguera