Owner's Manual

HEATING
Open the door and
place
food
in the oven
cavity. Close the
door.
"0"
must be showing
in the dlsptay
window.
A. Manual
Single Stage Heating:
This feature
gives
the user maximum
tlexibility
to set the oven to
desired
heating
time
and
power
level.
ldeal for menus
that require various
heating requirements.
Example: To heat for
2 minutes
at High Power
Oisplav Window
z.
[E:rT]--l
tE-.:.-Il--] EJT,t-l
.Press
the Power Level
Selector
Pad
one
iime.
.Press
the
Memory
Pads 2, 0 and
0.
.Press
the
START
Pad.
Heating will
start.
The
time on digital display will
count down.
.All
heating will stop.
When
opening the door,
the
display will
stop blinking.
4. Beep tone will
sound.
B.
Manual
2 or 3 Stage Heating:
This
feature
allows
you
to set to
begin heating
at one
power
level then
shitt automatically to
a difierent
power
level atter the
designated
amount of heating time.
Example:
To heat for
2 minutes
at Oefrost Power tor
2nd stage heating
For
Stage 1 cooking
1. Follow
steps 1 and 2
above.
For
Stage 2 cooking
Displav Windon,
'.fffi)
ulvEy
ErrT;-l ttrrTr-l
til.:-, fl,]
@
NOTE:
witt
stop btinking.
For a
3 stage heating
cycle, selecl a
power
level
again and set the cooking time
(steps
1
and 2 above).
SPECIAL NOTE: For
both single
and 2 or 3 stage heating.
1.
While heating,
one touch
on
the
STOP/RESET Pad
stops the oven.
You
can
restart
by
pressing
the
START
Pad
or a second touch
on the STOP/RESET Pad will
cancel the selected
program.
2.
One
touch
on the
STOP/RESET
Pad,
betore the heating cycle is started, will cancel the selected
program.
3.
r---t
ttt^"J
2.
.Press
the Power Level
Selector
Pad 3 times. Indicator will
change
each time the
pad
is
pressed.
DEF
is now displayed.
Stage 2
is
blinking.
.Press
the Memory Pads 2, 0
and 0.
.Press
the START Pad.
The
total time tor both stages will
be
displayed. The Active
Stage
"1'
and
the Power
Level
"Hl"
blinks. The
oven
Iamp
will be tumed on. Heating will
start.
.The
total time will display
and count
down.
.When
oven shitts to the next
stage, a
single beep tone will sound. The
Active Stage
"2"
and
the Power
Level
"DEF'blink.
.All
heating will stop.
When
opening the door, the display
4.
Beep tone will
sound.
(See page
16)
-9-