Owner manual

English
INFORMATION
ACTION
DISPLAY
1 Open Door. The oven lamp will come on.
2 Press PROG Pad.
Keep door open.
Keep pad pressed for 2 seconds until “P” is
displayed.
3 Press
Programme Number.
eg. To set Programme 03: SIMMER 20 mins.
Press NUMBER Pads 0 and 3.
If programme has been previously set, this will
appear in the display.
If the programme memory is empty then the
programme number will appear in the display.
5 Select Time. eg. Press NUMBER Pads 2, 0, 0, and 0.
After 3 seconds display returns to “0”.
6 Press PROG Pad.
4 Select Power. eg. Press MICROWAVE Pad 4 times.
•
Programme Lock
It is NOT possible to enter a programme when Programme Lock is set.
(See page 19.)
•
Multi-Stage (Sequential Cooking)
It is possible to programme into the memory a 2 or 3 stage programme using MICROWAVE,
CONVECTION, GRILL, FAN GRILL, GRILL CONVECTION or COMBINATION.
•
Changing a Memory Programme
To change a programme simply follow steps 1-6 on previous page entering your new programme.
Setting the Memory Programmes
Please ensure that the SD Memory Card is inserted in the Oven.
Your oven has 99 blank memory programmes for your own heating requirement.
All 99 Memory Programmes can be set manually using the Programme Pad on the control panel. However,
these programmes can be stored onto the SD Memory Card using your personal computer (see “Storing
Programme Data on SD Memory Card”).
Any programme information stored directly onto the SD Memory Card will override any manual programmes
previously set.
- 17 -