Operation Manual

User instructions

3.2 Washing programmes

Before starting a washing program make sure that:

• The water supply tap/valve is open.

• The correct amount of detergent has been added to the

dispenser.

• The baskets have been correctly loaded.

• The spray arms are able to rotate freely and without

obstruction.

• The dishwasher door is securely closed.

SPEED

PROGRAM

Select this option together with any washing program (except the soak program)

to SHORTEN the cycle by from a minimum of 10% to a maximum of 55%,

depending on the cycle selected. To activate this option, press the SPEED button

(light comes on) after selecting the program required. The option is

automatically deactivated at the end of the program.

EXTRA DRY

Function recommended for loads containing items which are difficult to

dry, such as pots, non-stick pans and plastic containers.

HALF LOAD

Suitable when there are not many dishes to be washed, it saves energy

and reduces the program duration. Place dishes in both baskets then

load the detergent dispenser than less than the normal amount for a full

load.

TABLET

DETERGENTS OPTION

Ideal for multi-function detergents, this option allows washing to be

optimised, with full benefits from the combined-action tablets. When this

option is activated, no salt or rinse aid will be used from their relative

containers.

N.B.: When the salt and rinse aid containers are empty, the relative

lights will remain on even if the option is selected.

IMPORTANT:

when no longer required, the option must be deactivated by pressing

the relative button (the light goes out).

If the water hardness has been set on a value above H3, and the option

is activated, the relative light flashes, warning of a setting error.

Multifunction products are not suitable for use with very "hard" water; this

does not prevent the use of the option, but it might not give the best

washing results.