Manual

6
Installation
Choosing the right location
Install the refrigerator in a location which satises the following criteria:
● Wherethereisamainwatersupplylinenearby
● Where the refrigerator will not be exposed to direct sunlight
● Where the refrigerator will be at a distance from heating appliances, cooking appliances and other
sources of heat
● Alocationwhichiswell-ventilatedanddry
● Wheretheoorissturdyandlevel
Place a solid board underneath if the refrigerator is to be installed on top of a carpet or vinyl oor.
The board will protect the oor from becoming deformed and discoloured.
Provide clearance to allow heat to dissipate
Residual heat is always being emitted from the refrigerator while
it is operating.
Provide sufcient clearance around the refrigerator to allow this
heat to dissipate so that its cooling ability is not impaired.
Dimensions (mm): W905 × D710 × H1850
Installing the spacers
Install the spacers on the back panel of the refrigerator to
ensure the minimum amount of space required to allow the heat
generated by the refrigerator.
Spacer (accessory)
Spacers
Attach to the back panel of the refrigerator
after removing the double-sided tape's
release liner.
Whenthedoorsarecompletelyopen
900 mm349 mm 426 mm
1675 mm
150˚
150˚
944 mm
989 mm
When the inside drawers have been taken out
900 mm319 mm 384 mm
1603 mm
140˚
140˚
974 mm
1032 mm
50 mm or more
30 mm or more
25 mm or more
Installation