Owner's manual

Tape Operation (continued)
‘Important: If the remote control POWER, ACTION, PROG, CHA/V, INDEX or ADD/DLT button does not work when
pressed, press the VCR button on the remote and try the button again.
Your D-VHS VCR is equipped with several
time saving features as well as convenient
automatic functions making tape operation
easier than ever.
• Some screens shown here may not be
displayed during digital playback.
ZERO/
1MIN
o © ©
0 © ©
© © ®
__ _ AQMM.T
® © @
CtXHTFI RESET OlSPUy
Repeat Play
The D-VHS VCR will play your recording over and over.
1 Press ACTION to display the menu.
Press AT to select “SET UP VCR,”
and then press to display the
“SET UP VCR” screen.
------------------ MENU --------------------
ETiiaCTJti-i
SET CLOCK
SET UP CHANNEL
SELECT:* ▼ KEY
SET :► KEY
END :ACTION KEY
Press AT to select “REPEAT
PLAY,” and then press ► to
select “ON” or “OFF.”
* When “ON" is selected, the D-VHS VCR
plays the tape to its end or until a blank
portion of over 30 seconds is detected
(erased portions are not considered blank).
The tape is then rewound and played again
and again until Repeat Play is turned off.
---------- SET UP VCR --------------
OFF
ON
OFF
BEEPER
WEAK SIGNAL DISPLAY
SELECT
SET
END
A T KEY
► KEY
ACTION KEY
Press ACTION twice to return to the normal screen.
One Minute Skip
The D-VHS VCR rapidly skips over one minute of tape.
Press ZERO/1 MIN in Play mode.
• The D-VHS VCR will go into FF search mode and skip over 60
seconds of recorded time. Normal playback will then resume.
Auto Operation Functions
Auto Playback
When a tape is inserted, the power
turns on (Auto). If the record tab’ is
removed, playback begins (Auto).
Auto Rewind
When a tape reaches its end during
playback, fast forward or manual
record, the D-VHS VCR will rewind and
go into Stop mode.
Playback Auto Eject
(Repeat Play is “OFF.”)
When a tape without a record tab* is
played to its end, the D-VHS VCR will
rewind and then eject the tape.
Memory Rewind Off
When the POWER button is pressed
during rewind, the D-VHS VCiR will turn
off after rewind is complete.
* For record tab information, see page 34.
30
Zero Search
To quickly return to a specific tape location..
3 Press DISPLAY to display the Time
Counter overlay during playback.
b Press COUNTER RESET
to reset the Time Counter to
“0:00:00” at the desired position.
PLAY 12:00AM
(STEREO)
(SAP)
MONO <
SP
C Continue playback, rewind, or fast forward.
d Press ZERO/1 MIN in Stop mode
when you want to return to
“0:00:00.”
• The D-VHS VCR will go into FF or REW
mode and stop at the last point the Time
Counter was set to 0:00:00.
STOP 12:00AM WNET
0:00:00
(STEREO) SP
(SAP)
MONO 4