Multimedia Projection HDTV Operating Instructions Models No. PT-44LCX65/PT-52LCX65/PT-61LCX65/ PT-52LCX35/PT-61LCX35 (USA) For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo (Puerto Rico) For assistance, please call : 787-750-4300 or visit us at www.panasonicpr.com Three Important Reasons to Register Your Product Immediately! 1 Protect Your New Investment...
IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel. This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any inside part of this unit.
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED) WARNING WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT PLACE OBJECTS FILLED WITH WATER, SUCH AS A VASE OR THE LIKE, ON TOP OF THIS APPARATUS. CAUTION (1) This Projection Display is intended to be used with the following TV stand: model TY-44LC65C for the PT-44LCX65, TY-52LC65C for the PT-52LCX35 or PT-52LCX65, TY-52LC35 for the PT-52LCX35 or PT-52LCX65, and TY-61LC65C for the PT-61LCX65 or PT-61LCX35.
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Projection Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt also, and record the serial number of your set in the space provided on the rear cover of these instructions. Visit our Panasonic Web Site for USA : www.panasonic.
Table of Contents IMPORTANT SAFETY INSTRUCTIONS ...............................................2 Before Using ..............................................................................................6 Location of Controls .................................................................................9 Installation................................................................................................12 Remote Control Quick Reference Guide (Operating peripheral equipment) ......
Before Using Receiver Location This Projection Display is intended to be used with an optional stand or entertainment center. Consult your dealer for available options. Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen. Use of some types of fluorescent lighting can reduce Remote Control transmitter range. Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.
Remote Control Battery Installation 1. 2. While pressing in on the catch, open cover in direction of arrow. Install the batteries as shown in the battery compartment. (Polarity + or - must match the markings in the compartment). Two AA size 3. Press cover in direction of arrow until it snaps shut. Helpful Hints: (1) For frequent remote control users, replace old batteries with Alkaline batteries for longer battery life.
Before Using (continued) Glossary and Acronyms CC (Closed Captioning) EAS (Emergency Alert System) OSD (On-Screen Display) MSO (Multiple system owner/operator) Dolby Digital This is a method of coding digital signals developed by Dolby Laboratories. Apart from stereo (2-channel) audio, these signals can also be multichannel audio. A large amount of audio information can be recorded on one disc using this method.
Location of Controls Illuminated Remote Control Press to switch to previously viewed channel or input modes. 12 REW While remote is in VCR or DVD mode, press to rewind. 13 PLAY While remote is in VCR or DVD mode, press to play. 14 PAUSE While remote is in VCR or DVD mode, press to pause. 18 19 20 15 TV/VCR Press to switch to TV or VCR. 21 16 SAP In analog mode, press to access audio modes (Stereo, SAP or Mono). In digital mode, press to access next audio track.
Location of Controls (continued) Controls and Terminals on the Projection Display Front View 1 2 3 4 5 1 MENU Press to display Main Menu. 2 OK Press to select menu and sub-menu items. 3 TV/VIDEO Changes Input source. 4 VOL –+ / ◄► Press to adjust TV sound and navigate in menus. 5 CH Press to change channels and navigate in menus.
Rear View Vent 6 8 2 10 12 14 16 18 15 17 19 Vent 3 4 5 7 9 11 13 Insert CableCARD™. 10 S-Video/Video Input Connector 2 Connect from other component. (Video 2) 2 VHF/UHF Cable In Input terminal for an antenna or cable box signal. 11 Audio Input Connector 2 Connect from other component. (Video 2) 3 DIGITAL AUDIO OUT Output audio signal (Digital) Audio/ HDMI Input Video 1 Terminal 1 Audio 1 5 Connect from other component.
Installation Notes on connections • Turn off the power supply for all components before making any connections. • If the cables necessary for connecting a component to the system are not included with the component or available as an option, you may need to fashion a cable to suit the component concerned. • Read the instruction manual for each system component carefully before connecting it. • If there is a lot of jitter in the video signal input from the video source, the picture on the screen may flicker.
Cable Connection Use this configuration when connecting the projection display to a cable TV system. Getting Started For proper reception of analog or digital cable channels, a cable service connection is required. Cable Box Terminal on the back of the Cable Box Connect the cable from the antenna or cable system to the VHF/UHF Cable In terminal on the back of the Projection Display.
Installation (continued) CableCARD™ Connection This module (also called Point of Deployment (POD) module or Digital Cable Module (DCM)) allows you to tune digital and high definition cable channels through the cable antenna. Contact your local cable company for information regarding the availability and costs of CableCARD™ related services. 1 2 Connect the cable antenna to VHF/UHF Cable In input on the back of the unit.
How to connect the “1, 2, 3” Input Terminals Connects VCRs and other peripheral equipment (S-VHS VCR) Getting Started Input 3 is located on the front of the unit. (P. 10) S-VIDEO AUDIO Similar connections are available at the INPUT 1, 2, 3 input terminals. (PP. 10-11) (VHS VCR) VIDEO AUDIO Similar connections are available at the INPUT 1, 2, 3 input terminals. (PP. 10-11) Notes: • Select the desired VIDEO input position by pressing the TV/VIDEO button. (P.
Installation (continued) How to connect the COMPONENT VIDEO Input Terminals Because each Y, PB, and PR signal is input independently, the Component signal allows for more accurate color reproduction. The Component signal output terminal indication will differ according to the output device (Y, PB, PR). Please read the operating instructions included with the output device.
How to connect the AV OUT Terminals Recording Equipment (S-VHS /VHS VCR) Getting Started You can connect a VCR to the AV OUT terminal to record the program you are viewing on-screen. An external monitor can also be connected to the AV OUT terminals. Connect the VCR as shown below. VIDEO AUDIO Notes: • This unit contains Video and Audio Outputs for the purpose of recording television programming to VCR. Due to license restrictions, if a device (STB, DVD, etc.
Installation (continued) How to connect the Amplifier Analog Audio Out To listen to the audio through a separate stereo system, connect an external audio amplifier to AUDIO OUT on back of unit. Stereo System (A Stereo Amplifier and Speakers) AUDIO Audio Adjustments • Select Speakers Off in Other Adjust menu under Audio menu. (See page 43.) • Set amplifier volume to the preferred level. Notes: • AUDIO OUT terminals cannot be connected directly to external speakers.
Digital Audio Out Getting Started Use the diagram below to connect the Digital Audio Output of your Projection Display to a Dolby Digital decoder. Dolby Digital 5.1 channel surround sound delivers digital-quality sound.
Installation (continued) How to connect the PC IN Terminals Connecting a PC to PC IN COMPUTER Audio Input Connector (Shared with both Video 3 and PC) RGB OUT AUDIO OUT Connect a cable which matches the audio output terminal on the computer. Audio cable (M3 stereo mini pin-PIN cable) Conversion adapter (If necessary) RGB cable (D-SUB 15P) (Not included) PC IN Terminal (D-SUB 15P) Pin Layouts 5 4 10 9 3 2 8 1 7 15 14 13 12 11 Connection port view 6 Pin No.
RGB signals that can be input Signal data Personal Computer Signals Mode type Information menu display No. of dots (H × V) Horizontal frequency (kHz) Vertical frequency (Hz) VGA400 (70 Hz) 640 × 400 31.47 70.08 VGA400 VGA480 (60 Hz) 640 × 480 31.47 59.94 VGA480 SVGA (60 Hz) 800 × 600 37.88 60.32 SVGA * XGA (60 Hz) 1 024 × 768 48.36 60.00 XGA Getting Started The table below lists the different types of RGB signals that can be input.
Installation (continued) How to connect the HDMI input terminal About HDMI HDMI is the first all digital consumer electronics A/V interface that supports several uncompressed standard, enhanced and high definition video format as well as all existing multi-channel audio formats. One jack supports both video and audio information. The HDMI/HDCP*1 input can be connected to an EIA/CEA 861/861B*2 compliant consumer electronic device, such as a set top box or DVD player equipped with a HDMI output connection.
Procedure Connect the HDMI output from the set top box or a DVD player to the HDMI input on the back of the unit. 2 Press TV/VIDEO to select HDMI input. • If you cannot display the picture because your Digital Set Top Box does not have a Digital Out terminal setting, use the Component Video Input (or the S-Video Input or Video Input). In this case, the picture will be displayed as an analog signal.
Power ON / OFF The Power Indicator POWER LED ACTION Off Power – OFF Red (blinking) Power – OFF (Now cooling) Green Power – ON SAP LIGHT TV VCR DVD DTV RCVR DBS/CBL AUX SLEEP EXIT TV/VIDEO E E CH VOL MENU NU U OK Green (blinking) Power – ON (Preparing to light lamp) RE LL CA MU T P E CT AS FAVORI T Notes: VOL CH RETURNN 1 2 3 4 5 6 7 8 R-TUNE • If the POWER button is accidentally turned off during use, after power is turned back on, it may take a short period befor
First Time Setup For your convenience, First Time Set up menu will be displayed on screen when the set is turned on for the first time. If needed, follow the menus and procedures displayed on-screen for setting up the features. 2 Press to select “ANT In”. CH VOL OK VOL CH Press to select “Cable” or “Antenna”. Auto program ANT In ◄ Cable ► Mode All Start scan Language The language of the on-screen display is set to English as the factory setting.
Basic Menu Navigation POWER SAP LIGHT TV VCR DVD DTV RCVR DBS/CBL AUX SLEEP EXIT TV/VIDEO Button operation during Menu display (Menu navigation) Return to Main Menu. MENU Press to display Main menu. Picture FAVORI T E E CH VOL MENU Audio RE LL CA MU T P E CT AS OK Timer VOL (PC input menu) Lock Menu Picture Audio Memory Card RETURN CH Setup 1 2 3 4 5 6 7 8 Note: • While Main Menu (only) is displayed, pressing MENU will exit the menu screen.
2 Other Adjust sub-menu. CH VOL OK VOL 5 CH Press to enter the menu. Picture Normal Pic. Mode Picture Brightness Color Tint Sharpness VOL OK VOL VOL OK VOL CH No Vivid +10 +10 +10 +10 +10 Press to select desired menu item. 6 VOL OK VOL CH Press to access Other Adjust sub-menu. No Vivid +10 +10 +10 +10 +10 Other Adjust Video NR 3D Y/C Filter Color Matrix MPEG NR Black Level 3D I/P Color Corr. Next Icon Sub Menu Field Picture Color Temp PC Adjust Other Adjust Adv.
Tuning channels 2 POWER VOL SAP VCR DVD DTV RCVR DBS/CBL AUX SLEEP EXIT TV/VIDEO FAVORI T E CH VOL MENU OK Press to display Language screen. Setup CH scan RE LL CA MU T P E CT AS E OK VOL CH LIGHT TV Press to select “Language”.
4 Automatic program setting Automatically searches and adds receivable channels to memory. Press to select “ANT In”. CH VOL OK VOL CH Press MENU to display the Main Menu screen. Press to select “Antenna” or “Cable”. 1 VOL OK Auto program ANT In ◄ Cable ► Mode All Start scan Press to select “Setup” icon. CH VOL CH Press to display the Setup menu. 5 Press to select “Mode”. CH VOL VOL CH Audio Press to select “All” or “Analog”.
Tuning channels (continued) Manual program setting Use this procedure when changing setting of receiving channels or changing the channel display. Also, use to add or delete channels from channel list manually. 4 Press to select “Edit”. CH VOL OK VOL CH Press to enter the edit mode. Press MENU to display the Main Menu screen. 1 Press to select “Setup” icon. CH VOL OK Edit VOL CH Press to display the Setup menu.
2 CH VOL OK VOL 2 Press to select “Caption detail”. Press to select “Favorite”. CH VOL CH OK VOL CH Press to display the Caption input screen. Press to select Favorite number. Apply Favorite 3 VOL OK Favorite Press to move cursor to “Caption”. CH 3 VOL VOL Press to enter input field. OK VOL CH Press to enter Favorite and return to Edit screen. Apply Caption Edit (Add) 4 CH VOL OK VOL Setting of register/delete in Program channel.
Projection Display operation (PT-44LCX65/PT-52LCX65/ PT-61LCX65) Input select [1] TV [2] Component 1 [3] Component 2 [4] Component 3 [5] HDMI [6] Video 1 [7] Video 2 [8] Video 3 [9] PC POWER SAP LIGHT TV VCR DVD DTV RCVR DBS/CBL AUX SLEEP EXIT TV/VIDEO FAVORI T E RE LL CA MU T P E CT AS E CH VOL MENU NU U OK Component 1 VOL CH RETURN RE ET 1 2 3 4 5 6 7 8 9 R-TUNE R TUNE PROG 0 REW PLAY FF PAUSE STOP REC TV/VCR SPLIT SWAP DVD/VCR CH OPEN/CLOSE Component 2 Compon
Using the CH/VOL Button 3 Select desired channel: or NUMBER keys. 2 3 4 5 6 7 8 9 Direct Tuning Example Step Action 1 2 3 4 5 Press 1 Press 5 Press Press 1 Press OK > < Press CH 1 0 Adjust to desired volume level: Press VOL + or VOL -. Notes: • The channel number and volume level are stored even after the unit is turned off. • Power consumption can be reduced if the volume level is lowered.
Projection Display operation (continued) To delete a favorite channel Audio Mute A memorized channel can be removed from the list by holding down FAVORITE while it’s position is highlighted. Press MUTE to instantly mute the sound. Press again to restore the previous sound level. Press this button to mute the sound. Press again to reactivate sound. Sound is also reactivated when power is turned off or volume level is changed. Use Favorite Feature Note: • The audio output from AV OUT is not muted.
Select Audio Mode for TV Viewing Digital mode SAP Press SAP to select the next audio track (if available) when receiving a digital channel. MTS Stereo broadcast Multi-channel Television Sound Stereo broadcast. Select STEREO audio mode. • If stereo broadcast is weak and the display flickers, select MONO audio mode for possibly better results. SAP broadcast Secondary Audio Program (sub language.) Select SAP audio mode for the sub language.
ASPECT Controls Notes: • When a 1080i or 720p signal is being received, the mode is set to FULL, and aspect switching is not available. • When input mode is CARD, the mode is set to 4:3, and aspect switching is not available. • If the mode selected does not match the aspect ratio of the input signal, the original picture quality may be affected.
Split screen Returning to one screen (Left screen) SPLIT SWAP DVD/VCR CH Press to return. POWER SAP LIGHT TV VCR DVD DTV RCVR DBS/CBL AUX SLEEP EXIT TV/VIDEO FAVORI TE E CH VOL MENU U OK RE VOL CH RETURN RET ET 1 2 3 4 5 6 7 8 R-TUNE 9 PROG 0 Caution when HDMI/PC is input REW PLAY FF PAUSE STOP REC TV/VCR SPLIT SWAP DVD/VCR CH OPEN/CLOSE • An HDMI signal and a PC input signal cannot be displayed at the same time on the left and right sides of the screen.
Split screen (continued) Select desired input mode of the Right screen TV/VIDEO Swapping left and right screens SPLIT SWAP DVD/VCR CH Press to select the desired input mode. Press to swap.
Picture Adjustments POWER SAP Normal / Picture / Brightness / Color / Tint / Sharpness / Color Temp LIGHT TV VCR DVD DTV RCVR DBS/CBL AUX SLEEP EXIT TV/VIDEO VOL FAVORI TE CH VOL MENU OK OK VOL CH RE LL CA MU T P E CT AS E Press to select each item. CH Press to adjust each item. VOL CH RETURN RET ET 1 2 3 4 5 6 7 8 Picture Normal Pic.
Picture Adjustments (continued) Picture Mode PC Adjust Lets you choose one of three pre-set Picture Modes that best suits the program to which you are viewing. Selecting this feature will also affect Color Temperature setting. You can adjust the picture when viewing a signal from a PC. 1 CH VOL Press to select “Pic. Mode”. CH VOL OK OK Press to select “PC Adjust”. VOL CH VOL Press to display the PC Adjust menu. CH Press to select picture mode. Picture Normal Pic.
Depending on the signal being input, some menu items may or may not be adjustable and some functions may or may not be available. Other Adjust Item 3D I/P Explanations Film media (taken at 24 frames per second) is faithfully reproduced on the unit. On: Recordings created at 24 frames per second are shown in higher quality. Off: Set to Off if picture appears unnatural. Other detailed picture adjustments can be made. 1 Press to select “Other Adjust”.
Audio Adjustments Normal / Bass / Treble / Balance POWER SAP VCR DVD VOL DTV RCVR DBS/CBL AUX SLEEP EXIT TV/VIDEO FAVORI T E CH MENU OK VOL CH Press to adjust each item. RE LL CA MU T P E CT AS E VOL Press to select each item.
Depending on the signal being input, some menu items may or may not be adjustable and some functions may or may not be available. BBE Other Adjust You can hear a deeper, 3-D sound effect using just the unit’s two front speakers. Other detailed audio adjustments can be made. 1 Press to select “BBE”. CH Press to select “Other Adjust”. CH VOL OK VOL CH VOL OK VOL Press to display the Other Adjust menu. CH Press to select BBE setting.
Sleep Timer Feature Set Sleep Timer Press to set unit to shut itself off after a preselected amount of time. POWER SAP LIGHT TV VCR DVD DTV RCVR DBS/CBL AUX SLEEP EXIT TV/VIDEO CH VOL FAVORI T E E CH VOL MENU OK RE 2 3 4 5 6 7 8 R-TUNE Timer Sleep RETURN RET ET 1 9 PLAY FF STOP REC TV/VCR SPLIT SWAP DVD/VCR CH OPEN/CLOSE 60 ► • Pressing the RECALL button with sleep timer set displays remaining time.
Lock Feature This Projection Display incorporates V-CHIP technology to block the viewing of movies and television programs according to the rating category. There are four (4) Content Advisory Categories: MPAA (Motion Picture Association of America), TV Parental Guidelines Ratings, Canadian English Language Ratings and Canadian French Language Ratings. These categories are used as guidelines for blocking the programs. The default mode for the Lock category is the Unlocked state.
Lock Feature (continued) Lock Set Block program This television incorporates V-Chip technology to block the viewing of movies and television programs according to the rating category. There are four (4) Content Advisory Categories: MPAA (Motion Picture Association of America), U.S.TV Program, Canadian English ratings and Canadian French ratings. These categories are used as guidelines for blocking programs. Select Lock mode to prevent viewing of video games, VCR tapes, channels and Video modes.
Monitor out setting 1 Press to select “Program”. CH VOL OK VOL CH Press to enter program lock menu. Lock Mode Off Channel Program Change password 2 Press to select “Monitor out”. CH VOL OK VOL U.S. TV PROGRAMS RATINGS CHART The TV Parental Guidelines has 7 levels of age-based ratings that can be selected. These 7 levels are split into 2 age-based groups: Youth Age-based Ratings and Guidance Age-based Ratings.
Lock Feature (continued) CANADIAN ENGLISH RATINGS CHART E C C8+ G PG 14+ 18+ Exempt - Exempt programming includes: news, sports, documentaries and other information programming, talk shows, music videos, and variety programming. Programming intended for children under age 8. No offensive language, nudity or sexual content. Programming generally considered acceptable for children 8 years and over. No profanity, nudity or sexual content. General programming, suitable for all audiences.
Photo Viewer Still image data (JPEG) made with a digital camera or digital video camera can be played back using an SD Card. WARNING As with any small object, SD cards can be swallowed by young children. Do not allow children to handle the SD card. CAUTION 1. 2. Always insert card in the correct direction. Failure to do so may result in damage to the card and this unit. The SD Card is precision devices. Do not subject them to excessive pressure or strong impacts.
Photo Viewer (continued) JPEG thumbnail The screen below is displayed automatically while a card is inserted. If “Is memory card in?” appears, check if a card is inserted. If not, turn the unit power off, correctly insert a card, then turn the unit back on. Now, place unit into Photo Viewer mode.
Card Warning Messages Exit Photo Viewer Pressing SD while a JPEG thumbnail is displayed redisplays the last viewed input. If there is a problem with the card or card data, the following messages will appear. Message Description Is memory card in? A card may not be inserted, or the card format may not be supported. (Use SD cards formatted in a digital camera.) No file. The card may not contain image data, or all images on the card may be incompatible. JPEG thumbnail Total 8 Info No.
Photo Viewer (continued) Single Play Mode Rotate image Press ▲▼◄► to move cursor to desired file in INDEX AREA. Press OK to display file in full screen size. Pressing the ◄► buttons rotates the image 90° at a time. Press ► : Each press right rotates image 90°. Press ◄ : Each press left rotates image 90°. JPEG thumbnail Total 8 Info No.
Slide Show Mode 1 Navigation Display Pressing RECALL during Slide Show mode allows you to display or remove the Navigation Area. CH VOL OK VOL CH Press during Single Play Mode. Select OK Rotate MENU RETURN Navigation Area 2 Press to select each item. CH VOL OK VOL Exit Slide Show mode CH Press to set each item. Pressing RETURN during Slide Show mode allows you to exit the mode. Single setting Mode Disp.
Setup Features CH scan You may choose the way in which channels are selected with CH . POWER SAP > < LIGHT TV VCR DVD DTV RCVR DBS/CBL AUX SLEEP EXIT Press to select “CH scan”. CH TV/VIDEO VOL FAVORI T E CH VOL OK VOL CH RE LL CA MU T P E CT AS E OK Press to select “Fav.” or “All”. VOL Fav.: CH only displays programs on the Favorite CH list. All: CH selects all channels memorized with Auto Program.
Input labels CC Mode To label video input connections for on-screen display. 1 Press to select “Input labels”. CH CH VOL OK Press to select “Mode”. VOL CH VOL OK VOL Press to select the setting. CH Press to enter the sub-menu field. Setup CH scan All Language Program channel Input labels CC Other adjust 2 VOL OK CH Press to select the input label. • To skip the input, select “SKIP”. The input will be skipped when you press TV/VIDEO.
Setup Features (continued) CC Mode for Digital Digital setting Size ◄ Automatic Font Automatic Style Automatic The Digital Closed Caption menu lets you configure the way you choose to view the digital captioning. Press to select “Digital”. CH VOL OK VOL Size CH Automatic, Normal, Small, Large Automatic, Default, Mono-serif, Prop-serif, Mono, Prop, Casual, Cursive, Small caps Automatic, None, Raised, Depressed, Uniform, Drop shadow Font Press to select the setting. • Primary, Second.
Other adjust (Setup) About You can set your preference as to the way the picture is displayed. 1 Press to select “Other Adjust”. CH VOL OK Display the TV set Version and Software License. 1 Press to select “About”. CH VOL OK VOL VOL CH Press to display the About screen. CH Press to display the Other Adjust menu. Setup CH scan Setup About Reset All Language Program channel Input label CC Other adjust 2 Press to select “Version” or “License”.
Remote Control Quick Reference Guide (Operating peripheral equipment) 2 VCR DVD RCVR DBS/CBL Press appropriate component button on the Remote Control. AUX POWER SAP LIGHT TV VCR DVD DTV RCVR DBS/CBL AUX SLEEP EXIT TV/VIDEO E E CH VOL MENU NU U OK RE 1 2 3 4 5 6 7 8 9 LL CA MU T P E CT AS FAVORI T 3 0 VOL CH RETURN RE ET 1 2 3 4 5 6 7 8 R-TUNE R TUNE 9 PROG Enter the 3-digit component code using the Remote Control number keys (0 ~ 9 buttons).
2 VCR DVD RCVR DBS/CBL 3 AUX CH VOL OK VOL CH Press appropriate component button on the Remote Control. Press VOL ► to move forward to the next code. Press VOL ◄ to move backward. Press the Remote Control POWER to test the component. If the procedure was successful, the component will turn on. Infrared Codes Index The Remote Control is capable of operating many brands of peripheral equipment. Refer to page 58 and 59 for programming procedures.
Remote Control Quick Reference Guide (continued) Codes For VCR Brand Code Codes For Cable Box Brand Code Penney Pentax Philco Philips Pioneer Proscan Quasar Radio Shack RCA Realistic Samsung Sansui Sanyo Scott Magnavox Memorex Movietime Oak Panasonic Philips Pioneer Pulsar Puser RCA Realistic Regal Regency Rembrandt Samsung Scientific Atlanta Slmark Sprucer Stargate Teleview Texscan Tocom Toshiba Unika Universal Videoway Viewstar Zenith Zenith/.
Codes For CD Player Brand Code Admiral Aiwa Carver Denon Emerson Fisher Harman/ Kardon Hitachi Jensen JVC Kardon Kenwood LXI/Sears Magnavox Marantz McIntosh Nakamichi Onkyo Optimus Panasonic Philips Pioneer Quasar RCA Sansui Sanyo Scott Sharp Sherwood Sony Soundesign Teac Technics Victor Yamaha 226 233, 235 229 242 239 205 219, 220, 221, 223 207 234 240, 241, 245 223 200, 201, 211, 245 236 229, 232 229 221 210 214, 215 208, 218, 220, 222 224, 225, 227 229, 230 208 224, 225, 227 231, 237, 238, 247 210, 246
Remote Control Quick Reference Guide (continued) Operating a CABLE BOX DBS Program the Remote Control to use with Cable Box. DBS/CBL TO DO THIS... PRESS POWER Turn on/off Codes For DBS Brand Code Dish Network (Echostar) Echostar Express VU G. E. G.I.
Operating a DVD Operating a Receiver Program the Remote Control to use with DVD. TO DO THIS... Program the Remote Control to operate audio receiver. TO DO THIS... PRESS PRESS POWER POWER Turn on/off Turn on/off Audio Mute CH Next/Previous Chapter VOL OK VOL CH CH RCVR.
Remote Control Quick Reference Guide (continued) Operating a PVR (Personal Video Recorder) Program the Remote Control to use with a PVR. TO DO THIS...
Warning Indicators This unit has indicators (lights on the front) to let you know the unit’s internal condition. (P. 10.) Depending on the condition, the Lamp, Power, or Temp indicator will flash to alert you. In this case, turn unit off and follow the measures below. Indicator Symptom Problem Possible Solution TEMP Indicator LAMP Indicator Flashes red 1 or 3 times every Power shuts off. 5 seconds. Malfunction Contact a service center. Flashes red 2 or 4 times every Power shuts off. 5 seconds.
Replacing the lamp unit The lamp unit is sold separately. To purchase a replacement, call the Panasonic accessory department, toll free at: 1-800-332-5368. Lamp unit Part No. : TY-LA1000 CAUTION Because of the possibility of injury, strictly follow the replacement procedure on the next page. Lamp unit replacement period The Lamp is a consumable item and it’s life varies based on individual usage. Panasonic warranties the original Lamp for a period of 18 months from the date of purchase of the TV.
both sides of the Front Cover with your 2 Grasp 5 (1) fingertips and pull it from the Projection Display Insert the new Lamp Unit being careful of the insertion direction. • Press on the arrow mark to make sure insertion is done correctly. (2) Tighten the Lamp Unit Screw with a screwdriver. to remove it. (2) Front Cover Lamp unit screw (1) Lamp unit 3 (1) (2) Turn the Lock/Open Knob to the left. Pull the Lamp Cover out and down to open it.
Troubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below. Symptoms Checks Page Power does not turn ON. No picture even if the power is turned ON. LAMP indicator blinks red. The POWER indicator flashes orange twice every 5 seconds. The TEMP indicator flashes 2 or 4 times every 5 seconds. The power turns OFF. The TEMP indicator flashes 5 times every 5 seconds. Power turns off while another indicator is flashing.
Specifications PT-44LCX65 PT-52LCX65/PT-52LCX35 PT-61LCX65/PT-61LCX35 Power Source AC 120 V, 60 Hz Power Consumption Power ON: Power OFF: LCD panels 0.7″ Poly silicon TFT LCD panel × 3 921 600 (1 280 × 720) stripe pixels × 3 panels (16:9) Display 44-inch, 16 : 9 aspect ratio Speaker 2 Speakers 30 W [15 W + 15 W ] (10 % THD) HID Lamp 100 W HID (High Intensity Discharge) Lamp Channel Capability (ATSC/NTSC) VHF/UHF Cable 2-69 1-135 RGB analog AUDIO 0.7 Vp-p (75 Ω) (D-SUB15P) 0.
Cleaning To ensure continued excellent performance by this product, periodic cleaning is recommended. The unit contains many plastic parts. For this reason DO NOT use benzine, thinner or other chemicals to clean the unit. Dust will accumulate on the picture screen. Please wipe with a soft cloth from time to time. If you use a chemically treated cloth, please be careful to follow the instructions that come with the cloth. DO NOT bring into contact with insecticide or other volatile substances.
Limited Warranty PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way Secaucus, New Jersey 07094 PANASONIC SALES COMPANY, DIVISION OF PANASONIC PUERTO RICO, INC., AVE. 65 de Infantería, Km. 9.
Other Information This product utilizes the following so called “open source” software: (1) the software which is licensed under the GNU GENERAL PUBLIC LICENSE, (2) the software which is licensed under the GNU LESSER GENERAL PUBLIC LICENSE, and (3) software developed by the third parties and available under certain terms and conditions.
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works.
Other Information (continued) 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this.
GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright © 1991, 1999 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.
Other Information (continued) TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called “this License”). Each licensee is addressed as “you”.
If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.) 7.
Other Information (continued) 12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 13.
Index 1080i ................................................................................ 16, 23 480i .................................................................................. 16, 23 480p ................................................................................ 16, 23 720p ................................................................................ 16, 23 A ASPECT button ................................................................. 9, 36 ATSC .....................................
Customer’ Record The serial number of this product can be found on its back cover. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.