User Guide

ENGLISH-37
Adjustments and settings
36-ENGLISH
Adjusting the picture
Press the F or G button to select an
item, and then press the I or H
button to change the setting.
For items with bar scales, press the
ENTER button or the I or H button
to display the adjustment screen,
and then press the I or H button to
make the adjustment.
For items without any selective
arrow or bar scale, press the ENTER
button. The menu screen for the item
will then be displayed.
When an S-VIDEO/VIDEO signal is
being input
PICTURE
PICTURE MODE NORMAL
CONTRAST 0
BRIGHT 0
COLOR 0
TINT 0
SHARPNESS 0
COLOR TEMP. 0
AI OFF
ADVANCE MENU
MEMORY SAVE
MEMORY LOAD
TV-SYSTEM AUTO
SELECT ADJ ESC
When a YP
BPR/PC signal is being
input
PICTURE
PICTURE MODE NORMAL
CONTRAST 0
BRIGHT 0
COLOR 0
TINT 0
SHARPNESS 0
COLOR TEMP. 0
AI OFF
ADVANCE MENU
MEMORY SAVE
MEMORY LOAD
SIGNAL MODE 525I
SELECT ADJ ESC
PICTURE MODE
Refer to page 27 for details.
CONTRAST
This adjusts the contrast of the
picture. (Adjust the “BRIGHT”
setting first if required before
adjusting the “CONTRAST” setting.)
The picture is bright: I button
The picture is dark: H button
BRIGHT
This adjusts the darker areas (black
areas) in the picture.
Black areas are too light: I button
Dark areas are too solid: H button
COLOR
(S-VIDEO/VIDEO/YPBPR/PC only)
The color is too deep: I button
The color is too pale: H button
When a DVI signal is being input
PICTURE
PICTURE MODE NORMAL
CONTRAST 0
BRIGHT 0
SHARPNESS 0
COLOR TEMP. 0
AI OFF
ADVANCE MENU
MEMORY SAVE
MEMORY LOAD
SIGNAL MODE XGA
SELECT ADJ ESC
TINT
(NTSC/NTSC 4.43/YPBPR/PC only)
This adjusts the flesh tones in the
picture.
The flesh tones are greenish : I button
The flesh tones are reddish : H button
SHARPNESS
To soften the picture details : I button
To sharpen the picture details : H button
COLOR TEMP.
This is used to adjust the white
areas of the picture if they appear
bluish or reddish.
AI
The lamp is controlled according to
the input signals to project images
with the best quality.
AI-1 For image sources with many
dark scenes such as movies.
AI-2 For image sources with many
bright scenes such as general
programs.
OFF “AI” is disabled.
ADVANCE MENU
Picture settings can be adjusted in
more detail.
Press the ENTER button to display
the “ADVANCE MENU”
“GAMMA HIGH/MID/LOW” is used
for correcting the gradation of a
bright or dark projected image.
B Adjust “GAMMA HIGH” mainly to
correct the gradation of a bright
projected image.
B Adjust “GAMMA LOW” mainly to
correct the gradation of a dark
projected image.
“CONTRAST R/G/B” and “BRIGHT
R/G/B” are used for correcting the
color temperature in more detail.
B Adjust “CONTRAST R/G/B”
mainly to correct the white areas
of the projected image.
B Adjust “BRIGHT R/G/B” mainly to
correct the black areas of the
projected image.
COLOR TEMP. -2
[
COLOR TEMP. -1
[
COLOR TEMP. 0
[
COLOR TEMP. +1
[
COLOR TEMP. +2
ADVANCE MENU
GAMMA HIGH 0
GAMMA MID 0
GAMMA LOW 0
CONTRAST R 0
CONTRAST G 0
CONTRAST B 0
BRIGHT R 0
BRIGHT G 0
BRIGHT B 0
SELECT ENTER ESC
NOTE:
B When PC signals are being
input, adjustment can be made
only when HDTV60/HDTV50
signals are being input.
NOTE:
B When PC signals are being
input, adjustment can be made
only when HDTV60/HDTV50
signals are being input.
NOTE:
B “AI” is disabled when “LAMP
POWER” is set to “LOW”.
(Refer to page 43.)