Initial Setup TV/DVD Combination Operating Instructions Models No. PV-20D52/PV-25D52/PV-D27D52 Basic Operation TV Operation Advanced Operation • Initial Setup and Connection Procedures are on pages 10 to 15. LSQT0592A Please read these instructions carefully before attempting to connect, operate, or adjust this product. Please save this manual. Spanish Quick Use Guide is included. (Guía para rápida consulta en español está incluida.
Important Safeguards and Precautions READ AND RETAIN ALL SAFETY AND OPERATING INSTRUCTIONS. HEED ALL WARNINGS IN THE MANUAL AND ON UNIT INSTALLATION 1 POWER SOURCE CAUTION Operate only from power source indicated on unit or in this manual. If uncertain, have your Electric Utility Service Company or Video Products Dealer verify your home power source. 2 POWER CORD PLUG For safety, this unit has a polarized type plug (one wide blade), or a three-wire grounding type plug.
Safety Precautions/Mesures de sécurité Warning : To prevent fire or shock hazard, do not expose this equipment to rain or moisture. Caution : To prevent electric shock, match wide blade of plug to wide slot, fully insert. Avertissement : Afin de prévenir tout risque d’incendie ou de chocs électriques, ne pas exposer cet appareil à la pluie ou à une humidité excessive.
Before Using Congratulations Loading the Batteries on your purchase of one of the most sophisticated and reliable products on the market today. Used properly, it will bring you and your family years of enjoyment. Please fill in the information below. The serial number is on the tag located on the back of your unit. Date of Purchase Dealer Purchased From Dealer Address Dealer Phone No. Model No. Serial No. Battery replacement caution • Do not mix old and new batteries.
Table of Contents Initial Setup Important Safeguards and Precautions / Safety Precautions ....... 2 ~ 3 Before Using ........................................................................................ 4 Information (Unit, Disc) .................................................................... 6, 7 Location of Controls ........................................................................ 8, 9 Connections / Initial Setup ..........................................................
Information (Unit, Disc) Specifications Display Picture Tube: Tuner Broadcast Channels: CABLE Channels: FM Radio Band range: General Power Source: Power Consumption: 20 inch measured diagonal 90° Picture Tube (PV-20D52) 25 inch measured diagonal 110° Picture Tube (PV-25D52) 27 inch measured diagonal 100° Picture Tube (PV-27D52) VHF 2 ~ 13, UHF 14 ~ 69 Midband A through I (14 ~ 22) Superband J through W (23 ~ 36) Hyperband AA ~ EEE (37 ~ 64) Lowband A-5 ~ A-1 (95 ~ 99) Special CABLE channel 5A (01) Ultraba
Disc formats supported by this unit The unit can play back discs bearing any of the following marks: DVD 3” (8 cm) disc / 5” (12 cm) disc Video CD 3” (8 cm) disc / 5” (12 cm) disc CD 3” (8 cm) disc / 5” (12 cm) disc Discs which cannot be played with this unit • DVD with Region No. other than “1” or “ALL” • DVD of PAL system • DVD-ROM • DVD-R/DVD-RAM • DVD-R/DVD-RAM • CD-ROM • CDV • CD-G • Do not try to play a Photo CD. is a registered trademark.
Location of Controls Remote Control Buttons (Light Tower™ Illuminated Remote Control) OPEN/CLOSE DVD Opens or closes the disc tray. Sets to DVD mode. POWER LIGHT Turns the unit on or off. See below. FM/TV DSS/CABLE Sets to TV mode. Receives FM radio signal. OPEN/CLOSE Sets the remote to control some basic DDS or Cable box functions. LIGHT MUTE TIMER Mutes the sound instantly. FM/TV 10 TE MU CHANNEL UP/DOWN Selects a channel. Sets ON TIMER or SLEEP TIMER.
Front View of the Unit and Indicators AUDIO/VIDEO IN Connector 2 (LINE 2) PHONES Connect an earphone or headphones. Connect from other component. SLEEPTIMER Indicator POWER (See previous page.) Lights when the Sleep-Timer is set. VOLUME UP/DOWN (See previous page.) CHANNEL UP/DOWN (See previous page.) SKIP | (See previous page.) PLAY (See previous page.) SKIP ON TIMER Indicator Lights when the On-Timer is set. STOP (See previous page.) | (See previous page.
Initial Setup (Ready to Play) Please make all cable or antenna connections before powering on. Connecting For ANT./Cable Connect the cable from Antenna/Cable to the VHF/ UHF terminal on the unit. For DSS/Cable Box Connect the OUT jack on your cable box to the VHF/ UHF terminal on the unit with a RF cable. PV-27D52 Rear shown. VHF/UHF VHF/UHF UNIT IN from ANT./CABLE Cable TV Converter Box WARNING: Overtightening "Nut type" RF coaxial cables may damage jacks. Finger tighten only.
*Important: If a remote control button does not work when pressed, press the FM/TV button on the remote and try the button again. Manual Clock Set Initial Setup If AUTO CLOCK SET was incomplete, manually set the clock as follows. OPEN/CLOSE LIGHT 1 POWER FM/TV DSS CABLE DVD 10 TE MU TIM ER Press ACTION on the Remote to display SET CLOCK Menu screen. CH AUDIO ANGLE R-T SUB TITLE DISPLAY TITLE MENU 2 Press to select the month and press SET to set.
Reset Language, Channels, Clock, 1 LOCK LANGUAGE 53 TV to display MAIN MENU. 1 CH CLOCK SELECT : END : ACT I ON 2 Press ACTION* M A I N MENU DVD Time SET : SET Clock Language Channels 1) Press to select language icon. 1) Press to select “CH.” 1) Press to select “CLOCK.
Time Zone Adjust OPEN/CLOSE FM/TV 10 LIGHT DSS CABLE DVD TE MU Initial Setup *Important: If a remote control button does not work when pressed, press the FM/TV button on the remote and try the button again. TIM ER CH VOL VOL UNE + CH R-T SU R RO UND Time Zone Adjust (Only when Auto Clock is set.) 1) Press to select “CLOCK.
Audio Connections ■ Unit ➛ Amplifier ➛ Speaker Ready Checklist Turn down the volume, then turn this unit, as well as other equipment to be connected, off before proceeding with connection. Do not block ventilation holes of any of the equipment and arrange them so that air can circulate freely. Read through the instructions before connecting other equipment. Ensure that you observe the color coding when connecting audio and video cables.
■ Unit ➛ Dolby Digital Decoder ➛ Amplifier ➛ Speaker When DVDs recorded in Dolby Digital or dts are played, Dolby Digital bitstream or dts bitstream is output from the unit Optical digital audio output connector. When the unit is connected to a Dolby Digital decoder or dts decoder, you can enjoy theater-quality audio in your home. [An optical digital audio cable (optional) is required when an optional Dolby Digital decoder or dts decoder is used.
Basic DVD Operation 1 2 Ready Checklist All connections are made. Your unit is plugged in. If unit is connected to an audio amplifier, turn the stereo system’s power on. OPEN/CLOSE FM/TV 10 TIM ER 10 CH UNE + R-T SU R RO UND VOL VOL CH SELECT ANGLE SUB TITLE DISPLAY TITLE TITLE MENU SET CLEAR ADD/DLT 3 Press PLAY to start play. Disc tray closes automatically. • You may also close the tray by pressing OPEN/CLOSE. • Data reading time differs with each disc.
*Important: If a remote control button does not work when pressed, press the DVD button on the remote and try the button again. ■ Forward/Reverse rapid scene search ➛ Press SLOW or SLOW during play. ➛ Press PLAY to release. • Starting forward/reverse search during play started from menu on Video CDs may recall menu. • Search speed, slow at first, increases with each additional press of the button up to 5 levels. Skip | or | during play.
TV Operation 1 *Important: If a remote control button does not work when pressed, press the FM/TV button on the remote and try the button again. Press POWER* on the remote or unit. 2 08 Ready Checklist All connections are made. Your unit is plugged in. Use CH or number keys to select a channel. VOL + / VOL - 3 Press VOL + or VOL to adjust volume.
MTS Broadcast / TV Stereo System ® Receivable Broadcast Types Equipped with -TV Noise Reduction for true MTS ® reproduction. -TV Noise Reduction is required for good stereo separation and audio fidelity. ® is a registered trademark, and ® is licensed by Technology Licensing. The following are possible audio broadcast types and on-screen displays. The signal being received is indicated with an “ ” mark while the selected audio mode is indicated with an arrow.
Closed Caption System Closed Caption is ... This multi-use system not only allows the hearing impaired to enjoy selected programs, but also makes useful information from TV stations available to everyone. Closed Caption Mode Feature 1 2 Press ACTION* to display MAIN MENU.
*Important: If a remote control button does not work when pressed, press the FM/TV button on the remote and try the button again. Caption On Mute Feature Closed Caption narration, if available, is displayed when MUTE button is pressed for silence.
TV Timer Features Ready Checklist ON-TIMER with Alarm This unit can be set to automatically power on in one of 3 modes (TV, FM radio, or DVD/Video CD/CD.) You can also combine the On-Timer with a one minute alarm that gradually increases in volume. 1 2 1) Press to select “ON TIMER.” 2) Press SET to display ON TIMER screen. SET T I MER ON T I MER SLEEP T I MER : 00 1) Press to select desired settings. 2) Press SET to set the ON-TIMER TIME or ON-TIMER mode.
On-Screen Display (OSD) *Important: If a remote control button does not work when pressed, press the FM/TV button on the remote and try the button again. TV Status & Clock Display Press DISPLAY to display or remove the overlay. Channel Current Time 1 2 : 0 0AM Receivable Broadcast Types (See page 19.
FM Radio FM Radio is ... This unit has an FM radio with built-in antenna, 9 station preset, and a band range of 87.5 ~ 108.1 MHz. You can even set the On-Timer (page 22) to wake up to your favorite radio station. FM Radio Setup 1 2 3 Press FM/TV on the remote to display FM radio mode. 1 2 : 0 0PM FM 1 87. 5MHz 1 2 : 0 0PM FM 1 8 7. 7MHz MEMORY : PRESS ADD / DLT KEY 8 7. 7MHz MEMOR I ZED To Make Corrections, select station with a number key, then do step 3 again.
FM Antenna Setup FM/TV OPEN/CLOSE FM/TV 10 DVD DSS CABLE DVD TE MU LIGHT TIM ER CH CH CH ADD/DLT AUDIO ANGLE SUB TITLE DISPLAY TITLE MENU CLEAR R-T UNE + ENTER SU R RO UND VOL VOL RETURN PLAY SKIP+ PAUSE STOP ZOOM SLOW/SEARCH Press ACTION to display MAIN MENU. M A I N MENU DVD LOCK LANGUAGE 53 TV SELECT : END : ACT I ON 1 CH CLOCK SET : SET 1) Press to select “TV.” 2) Press SET to display SET UP TV screen. DISPLAY SELECT 3 1) Press to select FM ANTENNA.
Cable Box Universal Remote Control Feature Universal Remote Control is... The Remote Control may be set up to control some basic DSS or Cable box functions. The Universal Remote Control Setup Confirm code entry. Press POWER to turn selected unit ON or OFF. • See below for controllable functions in each mode. FM/TV FM/TV 10 LIGHT DSS CABLE DVD TE MU TIM ER CH VOL VOL + CH UNE DVD SU R RO UND Hold down DSS CABLE and press number keys to enter code. • If code number is 100 or greater, e.g.
DSS Brand Code Numbers Toshiba ........................................................... 90 Hitachi/ Hughes ........................................ 91, 99 Primestar ........................................................ 92 Drake .............................................................. 93 Magnavox ................................................. 94, 95 Uniden ....................................................... 94, 95 Optimus ....................................................
Special Features Remote Warning Feature Weak Signal Display Feature When Universal Remote Control (page 26) is used, and this feature is set to “ON,” a warning appears whenever an invalid key is pressed in DSS or Cable mode. When “ON” is selected, the picture is displayed even when a broadcast signal is weak or nonexistent.
*Important: If a remote control button does not work when pressed, press the FM/TV button on the remote and try the button again. Channel Caption DVD Volume Adjust Channel Caption is ... Station names, e.g. ABC, CNN, etc. are set so they will appear when a channel is selected. Choose 24 preset names. You need a list of stations and the channel numbers you receive them on. 1 2 Press ACTION to display MAIN MENU.
V-Chip Control Feature V-Chip Control Feature is... This unit has a built-in V-Chip Control which allows you to block unwanted TV usage based on US MOVIES and US TV PROGRAMS Ratings. Process of V-Chip Control Feature Enter Code Setup Blocking Enter Secret Code A 4-digit code must be entered to view a blocked program or change rating settings. Press ACTION* to display MAIN MENU.
*Important: If a remote control button does not work when pressed, press the FM/TV button on the remote and try the button again. If LOCK menu is not displayed, perform “Enter Secret Code” steps on page 30. Process of V-Chip Control Feature Enter Code Setup Blocking US MOVIES RATINGS US MOVIES Ratings 1 LOCK US MOV I ES : OFF CHANGE SETT I NGS : OFF US TV PROGRAMS CHANGE SETT I NGS : OFF DVD LOCK CHANGE SETT I NGS NEXT PAGE SELECT : SET : SET END : ACT I ON 1) Press to select US MOVIES.
V-Chip Control Feature (continued) If LOCK menu is not displayed, do “Enter Secret Code” steps on page 30. US TV PROGRAMS Ratings 1 LOCK US MOV I ES : OFF CHANGE SETT I NGS : OFF US TV PROGRAMS CHANGE SETT I NGS : OFF DVD LOCK CHANGE SETT I NGS NEXT PAGE SELECT : SET : SET END : ACT I ON 1) Press * to select US TV PROGRAMS. 2) Press SET to set “ON” or “OFF.” ■ “ON” ➛ V-Chip Control is activated. ■ “OFF” ➛ V-Chip Control is deactivated. Note • “NEXT PAGE” displays CANADIAN V-Chip setting menu.
*Important: If a remote control button does not work when pressed, press the FM/TV button on the remote and try the button again. Process of V-Chip Control Feature Enter Code Setup Blocking Blocking Message OPEN/CLOSE FM/TV 10 • If a program or movie ABC exceeds the ratings you have set, a message PROGRAM RAT I NG EXCEEDED will appear on a black RAT I NG : PG-1 3 background and sound ACCESS CODE ---is muted.
Video / Audio Menu *Important:If a remote control button does not work when pressed, press the FM/TV button on the remote and try the button again. This feature allows easy setting of picture and sound suitable for each program source. Video Menu Press ACTION* to display MAIN MENU.
Video / Audio Adjustment Video Adjustment 1 2 Press ACTION to display MAIN MENU.
Disc Operation Subtitle Language (DVD only) You can select a different subtitle language (if offered) than the one set at the Settings for DVD Operation. (See page 46.) 1 Press SUB TITLE* in Play mode to display the subtitle selection on-screen. Ready Checklist Please read “Basic DVD Operation” on page 16. [Subtitle language (No.)] [Audio soundtrack language (No.)] • Display disappears after 5 seconds. • When no subtitles are offered, “-” will be displayed instead of the language number.
*Important: If a remote control button does not work when pressed, press the DVD button on the remote and try the button again. When appears on the screen while a button is being pushed, it means that the corresponding operation is prohibited by the unit or the disc. Multiple Angle Viewing (DVD only) DVDs may contain scenes shot from multiple camera angles allowing the same scene to be viewed at different angles. You can view these angles, if available, using the ANGLE button.
Disc Operation (continued) Title menu (DVD only) Some DVDs have more than one title, e.g. movies. If the disc offers a title menu, you can select the desired title number. (Operation may vary according to the disc.) Dogs Cas t l es Love r s B i r ds B i rds of the world 1) Press or number Key(s) to select a title. 2) Press SET or PLAY to start play. • Step 2) not necessary when using number key(s). FM/TV CH DVDs may offer a special menu.
*Important: If a remote control button does not work when pressed, press the FM/TV, DVD button on the remote and try the button again. Ready Checklist Program Play (Video CD/CD) You can program specific tracks and order of play. 1 2 Press ACTION in Stop mode to display MAIN MENU. M A I N MENU 1) Press to select “DVD.” LOCK LANGUAGE DVD 2) Press SET to 53 display screen. CH TV CLOCK 1 SELECT : END : ACT I ON 3 1) Press to select “PLAY MODE.” 2) Press SET to display screen.
Disc Operation (continued) Random Play (Video CD/CD) Tracks are played in a random order. LOCK LANGUAGE 53 TV 3 10 : : SET : ACTION LIGHT DSS CABLE DVD TE MU SET : SET DVD MAIN MENU SELECT SET END FM/TV TIM ER CH SU R RO UND SELECT : END : ACT I ON 1 CH CLOCK OPEN/CLOSE 1) Press to select “PLAY MODE.” 2) Press SET to display screen. VOL VOL + CH UNE DVD 1) Press to select “DVD.” 2) Press SET to display screen.
DVD Operation using On-Screen Displays When DISPLAY is pressed, On-Screen Displays show disc information (title/chapter/track number, elapsed playing time) and unit information (repeat play, Play mode). 1 Ready Checklist Unit is in DVD mode, press DVD. Press DISPLAY in Play or Stop mode to display “On-Screen Display.” • Each press of DISPLAY changes the on-screen display as follows. (Please refer to page 42 or 43.
DVD Operation using On-Screen Displays (continued) Detailed Descriptions of Each On-Screen Display Disc information screen (for DVD) 1. TITLE No. • Change the No. by pressing keys, and press SET. * or the NUMBER 1 2 T I TLE : 1 CHAPTER : 12 DVD 1 : 12 : 55 3 4 2. Chapter No. • Change the No. by pressing keys, and press SET. or the NUMBER 3. Disc currently being played 4. Elapsed playing time SELECT : SET : SET NEXT : DISPLAY The screen may be changed by selecting the elapsed time.
*Important: If a remote control button does not work when pressed, press the DVD button on the remote and try the button again. Detailed Descriptions of Each On-Screen Display Unit information screen • Change the desired mode during play by pressing , and press SET. a. Repeat Play DVD CHAPTER REPEAT TITLE REPEAT Video CD/CD TRACK REPEAT DISC REPEAT REPEAT OFF REPEAT OFF PLAY CHAPTER REPEAT a SELECT : SET : SET END : DISPLAY b. Play mode [Video CD/ CD only] (See page 39 or 40.
MP3 Playback Operation MP3 Playback You can use this unit to play MP3 format audio recorded for personal use with a computer etc. onto a CD-R or CD-RW. Play may not be possible in some cases due to the condition of the recording. ■ MP3 playback (During STOP mode) 1) Press to select an MP3 file ( ). 2) Press SET or PLAY to start playback. 1 2 3 ■ Select folder (During STOP mode) 1) Press to select a folder ( ). 2) Press SET to display files/folders contained in the folder.
DVD Lock Feature *Important: If a remote control button does not work when pressed, press the FM/TV, DVD button on the remote and try the button again. You can prevent playback of DVDs with a specific rating level which may be unsuitable for children. • Some DVDs are encoded with a rating level. If the disc rating is higher (stricter) than the one you preset, playback will be prohibited. Caution Discs not encoded with a rating level will play even if the jacket states it is for mature audiences.
Settings for DVD Operation 1 2 Press ACTION* in Stop mode to display MAIN MENU. M A I N MENU DVD LOCK LANGUAGE 53 TV SELECT : END : ACT I ON 3 1 CH CLOCK SET : SET DVD MAIN MENU DISC LANGUAGES AUDIO OUTPUT ST I L L MODE : AUTO TV MODE : Letterbox SELECT SET END 1) Press to select “DVD.” 2) Press SET to display screen. Once initial settings are done, they remain in memory (even after the power is off) until changed.
*Important: If a remote control button does not work when pressed, press the FM/TV, DVD button on the remote and try the button again. AUDIO OUTPUT Select the digital output to be output from the optical digital audio output connector of the unit. 1 2 Do steps 1 and 2 on page 46. DVD MAIN MENU DISC LANGUAGES AUDIO OUTPUT ST I L L MODE : F I ELD TV MODE : Letterbox SELECT SET END 3 : : SET : ACTION AUDIO OUTPUT LPCM(DVD) Dolby Digital dts DRC SURROUND SELECT SET END 1) Press to select “AUDIO OUTPUT.
Settings for DVD Operation (continued) STILL MODE Set to reduce jitter in a displayed still picture or a motion picture. Do steps 1 and 2 on page 46. OPEN/CLOSE SELECT SET END : : SET : ACTION DSS CABLE DVD 10 TE MU TIM ER CH VOL VOL + CH ADD/DLT AUDIO ANGLE SUB TITLE DISPLAY TITLE MENU CLEAR AUTO: ENTER “FIELD” (Field still) or “FRAME” (Frame still) is automatically selected during the still mode. (Factory preset) FIELD: “FIELD” (Field still) is always selected.
Language Code List Enter the appropriate code number for the initial settings “AUDIO”, “SUBTITLE” and/ or “MENUS” (see page 46).
Before Requesting Service Check the following points once again if you are having trouble with your unit. Power Correction No power… • Completely insert Power Plug into an AC outlet. • Set POWER button to ON. Power turns itself off... • Auto power-off (shutoff) occurs after about 5 min. in DVD mode with no operation, or if there is no broadcast signal in TV mode. Turn the power back on. (P. 17, 28) Monitor Correction No picture or sound...
DVD/Video CD/CD Correction Play fails to start even when PLAY is pressed... • This unit cannot play discs other than DVDs, Video CDs and CDs. • The disc may be dirty and require cleaning. Play starts but then stops immediately... • Be sure disc is installed with label side up. Picture is distorted during rapid advance or rapid reverse... • The picture will be somewhat distorted at times: this is normal. No Forward/Reverse search play...
Limited Warranty PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA One Panasonic Way Secaucus, New Jersey 07094 PANASONIC SALES COMPANY, DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO, INC., AVE. 65 de Infantería, Km. 9.
Limited Warranty Limits And Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage, nor does it cover markings or retained images on the picture tube resulting from viewing fixed images (including, among other things, letterbox pictures on standard 4:3 screen TV’s, or non-expanded standard 4:3 pictures on wide screen TV’s, or onscreen data in a stationary and fixed location).
Spanish Quick Use Guide/Guía para rápida consulta Conecte por favor todas las conexiones del cable o de la antena antes de turing potencia. Conectando Para Ant./Cable Conecte Ant./Cable a la entrada de antena de la TV (VHF/UHF). VHF/UHF Ant./Cable VHF/UHF Unidad Convertidoe de cable Para Sistema Digital de Satelite (DSS)/Convertidor de cable Conecte la salida del convertidor de cable la “VFH/UHF” con el RF cable. VHF/UHF Ant.
Ajuste Manual del Reloj Si el ajuste automático del reloj no se ha completado, ajuste el reloj manualmente de la siguiente manera. 1 Presione la tecla ACTION en el control remoto para visualizar la pantalla del menú RELOJ. SET CLOCK DST : ON SELE CT MONTH 2 Presione ▲▼ para seleccionar el mes y SET para ajustar. De la misma forma, seleccione y ajuste la fecha, año, hora y DST (Hora de Verano). 3 Presione dos veces la tecla ACTION para poner el RELOJ en marcha y salir.
Spanish Quick Use Guide/Guía para rápida consulta Operaciones básicas del DVD 1 2 Presione POWER en el control remoto o el aparato. Introducir un disco. 1) Presione OPEN/CLOSE. 2) Ponga un disco en la bandeja de disco. • Sujete el disco sin tocar ninguna de sus superficies, póngalo con el lado donde esté impreso el título hacia arriba, alinéelo con las guías y póngalo en su posición apropiada. 1 Disco de 3”(8 cm) 2 Disco de 5” (12 cm) 3 1 2 Iniciar la reproducción Presione PLAY.
Cambio del idioma de subtítulos [DVD solamente] EI idioma de los subtítulos seleccionado al hacer las fijaciones iniciales se puede cambiar por otro idioma diferente, si éste se encuentra disponible. 1 SUBTITULO : 1 ENG ACTI VO I love you ELEGI R : 2 FI JAR : SET SUBTITULO : 3 ESP ACTI VO Te amo ELEGI R : FI JAR : SET Presione SUBTITLE durante la reproducción. • Cuando no haya subtítulos grabados, “-” se visualizará en lugar del número de idioma. Seleccionar el idioma deseado.
Spanish Quick Use Guide/Guía para rápida consulta Visión desde otro ángulo [DVD solamente] Algunos discos DVD tienen escenas que han sido filmadas simultáneamente desde un número de ángulos diferentes. Con estos discos, la misma escena podrá verse desde cada uno de estos ángulos diferentes utilizando el botón ANGLE. 1 Presione ANGLE durante la reproducción. ELEGIR : 2 Visualizar la pantalla de ángulo.
Reproducción programada [Vídeo CD/CD] Puede usted programar pistas específicas y el orden de reproducción. • Vídeo CD o CD es insertado en el modeo DVD. 1 2 Visualizar MAIN MENU. Presione ACTION en el modo parada. Vísualizar la pantalla DVD. MENU PRINCIPAL DVD BLOQUEO IDIOMA 5 TV RELOJ 3 1 1) Presione para seleccionar “DVD.” 2) Presione SET para visualizar.
Spanish Quick Use Guide/Guía para rápida consulta Fijaciones iniciales 1 2 3 Visualizar MAIN MENU. 4 Seleccionar el artículo deseado. 5 Volver a visualizar el menú de DVD para continuar el ajuste. Presione ACTION en el modo de parada. Visualizar la pantalla DVD. 1) Presione 2) Presione SET. para seleccionar. Seleccionar el artículo deseado. 1) Presione para seleccionar. 2) Presione SET.
Selección de SALIDA DE AUDIO Seleccione “LPCM(DVD)” Selección de DETENER RASTREO AUTO : INACTIVO : Por el conector de salida de audio digital solamente sale PCM lineal de 48 kHz/16 bits. Durante la reproducción del DVD grabado en el PCM lineal de 48 kHz/20 bits o 96 kHz, no sale audio digital. (Fijación de fábrica) PCM : Durante la reproducción del DVD grabado en el PCM lineal de 48 kHz/ 20 bits/24 bits o 96 kHz, sale audio digital convertido a 48 kHz/16 bits.
Index TV A Accessories .................................................... 4 L Language ................................................. 10, 12 AC Power Plug ................................................ 9 ACTION button ......................................... 8, 12 ADD / DLT button ...................................... 8, 13 Audio Adjustment .......................................... 35 Audio Auto Gain Control (AGC) .................... 34 AUDIO button ......................................
DVD A ANGLE button ........................................... 8, 37 B C D F K L M O P S Settings for DVD Operation .................. 46 ~ 48 I / I button .......................... 8, 16, 17 SKIP Slow Motion (DVD/Video CD) ....................... 17 SLOW / button ............................... 8, 17 STILL MODE ................................................. 48 Still (Pause) Picture ....................................... 17 Subtitle language (DVD) ............................... 36 T TV MODE .....
LSQT0592A Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 Panasonic Sales Company (“PSC”), Division of Matsushita Electric of Puerto Rico, Inc. Ave. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985 20_25_27D52 (P64 BC).p65 64 P Printed in U.S.