PV-DF2036M/PV-DF206M TV Operation Models No. Getting Started TV / DVD / VCR Combination Operating Instructions VCR Operation TV/VCR Operation • Connection and Initial Setup Procedures are on pages 10 and 13. Disc Operation As an ENERGY STAR® Partner, Panasonic Corporation of North America has determined that this product or product model meets the ENERGY STAR® guidelines for energy efficiency.
Before Using Safety Precaution Congratulations On your purchase of one of the most sophisticated and reliable products on the market today. Used properly, it will bring you and your family years of enjoyment. Please fill in the information below. The serial number is on the tag located on the back of your unit. Be sure to read the following cautions carefully. WARNING Never pick unit up by VCR cassette opening.
Safety Precautions/Mesures de sécurité TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT IN WALL SOCKET. FULLY INSERT. Getting Started WARNING AVERTISSEMENT : AFIN DE PRÉVENIR TOUT RISQUE D’INCENDIE OU DE CHOCS ÉLECTRIQUES, NE PAS EXPOSER CET APPAREIL À LA PLUIE OU À UNE HUMIDITÉ EXCESSIVE.
IMPORTANT SAFEGUARDS AND PRECAUTIONS WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK, FIRE, INJURY TO PERSONS OR DAMAGE TO THIS PRODUCT, READ AND RETAIN ALL SAFETY AND OPERATING INSTRUCTIONS. HEED ALL WARNINGS IN THE MANUAL AND ON THE PRODUCT. INSTALLATION 1 2 3 4 5 6 POWER SOURCE CAUTION Operate only from power source indicated on unit or in this manual. If uncertain, have your Electric Utility Service Company or Video Products Dealer verify your home power source.
Table of Contents VCR Operation Tuning TV ............................................................................................................................... 13 TV Operation .......................................................................................................................... 16 MTS Broadcast / TV Stereo System ..................................................................................... 18 TV Timer Features ..........................................................
Information Information (Unit, Cassette) Loading the Batteries 1 Open the cover. 2 Insert batteries as marked. 3 Close the cover. • Insert so the poles (+ and - ) match those in the remote control. • Do not use rechargeable type batteries. Do not: • • • • • • Mix old and new batteries. Use different types at the same time. Heat or expose to flame. Take apart or short circuit. Attempt to recharge alkaline or manganese batteries. Use batteries if the covering has been peeled off.
DVDs that can be played You can play discs with these symbols. Playing DVDs The producer of these discs can control how they are played so you may not always be able to control play as described in these operating instructions. Read the disc’s instructions carefully. Disc Handling Getting Started Discs that cannot be played DVD with Region No. other than “1” or “ALL”, DVD from PAL system, DVD-ROM, DVD-AUDIO, CD-ROM, CDV, CVD, CD-G, CD-TEXT, SACD, Photo-CD. • Do not use irregularly shaped discs (e.g.
Location of Controls Remote Control Buttons 1 2 18 19 3 20 4 21 5 6 22 7 23 8 9 24 25 10 26 11 27 12 13 14 15 28 29 30 31 16 32 17 33 1 OPEN / CLOSE / EJECT When this button is pressed in TV / VCR mode, the tape is ejected. This button is inoperative if pressed during recording. If pressed in DVD mode, the disc tray opens or closes. 2 POWER Turns the unit on or off. 21 NUMBER Keys Selects a channel directly. 3 DISPLAY Displays the TV status and clock.
Getting Started Unit Buttons Front View 1 3 2 7 5 6 4 8 9 12 10 13 14 15 1 Built In Speakers Equipped with 2 front speakers. Audio Input 2 Connector 2 3 Compartment Insert VHS tapes here. 4 Disc Tray Place compatible discs here. 5 Phones Jack Connect an ear phone or headphones. Video Input 9 6 Connector 2 Connect from other component. (LINE 2) 7 POWER Turns the unit on or off. VCR Operation Cassette Connect from other component. (LINE 2) 8 STOP/ EJECT STOP: Stops playback.
Connections Notes on connections • Turn off the power supply for all components before making any connections. • If the cables necessary for connecting a component to the system are not included with the component or available as an option, you may need to fashion a cable to suit the component concerned. • Read the instruction manual for each system component carefully before connecting it.
Enjoy the powerful movie theater and hall-like sound available with multiple channel audio found on DVDs by connecting an amplifier and speakers. There are two types of connection, digital and analog. WARNING Don’t place the unit on amplifier or equipment that may become hot. The heat can damage the unit. Getting Started Connecting the Audio Output Terminal Digital connection Firmly connect the cable to the connector.
Analog connection Connect an analog amplifier to enjoy high-quality stereo sound with sampling frequencies of 96 kHz. IMPORTANT NOTE: Caution for optical digital audio output connector: • Be sure to refer to page 50 regarding output settings of Dolby Digital, DTS, and PCM. • CDs and Video CDs can be played as usual. • Audio from the Digital Audio Out terminal is only output during playback. • When connecting an amplifier which contains the Dolby Digital or DTS decoder, be sure to select “Bitstream”.
Tuning TV Case 2 POWER NUMBER Keys If setup is incomplete, the following screen appears. Check connection of Antenna/Cable to the RF in Terminal, then try to manually set the clock as follows. ADD/DLT a. IS INCOMPLETE PLEASE SET CLOCK BY PRESSING ACTION KEY Press ACTION on the Remote Control to display SET CLOCK Menu screen. SET CLOCK 1/ 1/2006 SUN 12:00AM DST:ON CH ▲▼ STOP SELECT: START :ACTION b.
Add or Delete a Channel Manual Clock Setting To add channel: Select channel with NUMBER keys and press ADD/DLT. CHANNEL 08 ADDED 1 Press ACTION to display MAIN MENU. 2 Press ▲▼◄► to select “CLOCK.” MAIN MENU DVD LOCK LANGUAGE TV CLOCK SELECT: END :ACTION To delete channel: Select channel with CH ▲▼ or NUMBER keys and press ADD/ DLT. CHANNEL 08 DELETED 3 CH SET:SET Press SET to display SET CLOCK screen. (“TIME ZONE ADJUST” appears only when auto clock is set.
Time Zone Adjust Change Language Setting (Only when Auto Clock is set.) 1 2 1 2 Press ACTION to display MAIN MENU. Press ACTION to display MAIN MENU. Press ▲▼◄► to select “LANGUAGE.” Press ▲▼◄► to select “CLOCK.
TV Operation Method 2: Press INPUT. The display will change as follows. RAPID TUNE MUTE INPUT ACTION SELECT ▲▼◄►/ SET CH▲▼ LINE1 NUMBER keys LINE2 TUNER Method 3: 1 2 100 key Press ACTION for MAIN MENU. Press ▲▼◄► to select “TV”, then press SET for SET UP TV screen. VOL+/- MAIN MENU DVD LOCK LANGUAGE TV SURROUND CLOCK SELECT: END :ACTION 3 CH SET:SET Press ▲▼ to select “INPUT SELECT,” and then press SET to select “TUNER”, “LINE 1”, or “LINE 2.
Rapid Tune Press R-TUNE to display the last channel you were watching. Audio Mute Weak Signal Display Feature When “ON” is selected, the picture is displayed even when a broadcast signal is weak or non-existent. Press ACTION to display MAIN MENU. Press ▲▼◄► to select “CH.” Press SET to display SET UP CHANNEL screen. Press MUTE to instantly mute the sound. Press again to restore the previous sound level.
MTS Broadcast / TV Stereo System Receivable Broadcast Types The following are possible audio broadcast types and on-screen displays. The signal being received is indicated with a “ ” mark while the selected audio mode is indicated with an arrow. To change the audio mode for these broadcasts, see the “Audio Mode for TV Viewing” section. DISPLAY 1 Press DISPLAY to display the broadcast signal being received. MTS Stereo broadcast: Multi-channel Television Sound Stereo broadcast. Select STEREO audio mode.
TV Timer Features • Make sure a tape is inserted if Playback ON TIMER mode mode is selected. selection order • Make sure a disc is inserted if Disc (DVD/CD/Video CD) mode is selected. Lowest CH01 Disc channel DISPLAY Highest CH125 channel ADD/DLT To Make Corrections, use ▲▼ and ◄ ► to move back and correct. 6 Press PROG to set ON TIMER. • “ON TIMER SET” is displayed. • ON TIMER Indicator lights up on the unit.
Closed Caption System 4 5 Press ▲▼ to select “CAPTION”. Press SET to display CAPTION screen. SET UP TV CAPTION INPUT SELECT :TUNER SET UP VIDEO/AUDIO DVD VOL ADJUST :+2 MUTE ACTION SELECT: END :ACTION SELECT ▲▼◄►/ SET 6 7 SET:SET Press ▲▼ to select “CAPTION MODE.” Press SET repeatedly to select mode. CAPTION CAPTION MODE : OFF CC ON MUTE : CAP C1 SELECT: END :ACTION OFF TEXT C2 SET:SET CAP C1 CAP C2 TEXT C1 Caption Mode: CAP C1 or C2 A narration of selected TV programs is displayed.
Caption On Mute Feature 10 Press ACTION three times to return to the normal Closed Caption narration, if available, is displayed when MUTE button is pressed for silence. 1 11 Press MUTE to mute the sound and display closed Press ACTION to display MAIN MENU. captioning. • To cancel, press MUTE again. Press ▲▼◄► to select “TV.” Press SET to display SET UP TV screen.
Video / Audio Setting 6 7 Press ▲▼ to select “VIDEO MENU.” Press SET repeatedly to select desired mode. SET UP VIDEO/AUDIO VIDEO VIDEO AUDIO AUDIO ACTION MENU :NORMAL ADJUST MENU :MUSIC ADJUST SELECT: END :ACTION SELECT ▲▼◄►/ SET 8 SET:SET NORMAL Factory setting. MOVIE Picture is adjusted for a movie-like feel. NIGHT Color and picture intensity are adjusted to be easier on the eyes for night viewing. Press ACTION three times to end setup. Audio Menu 1 2 3 Perform steps 1 - 5 at left.
Video Adjustment 1 2 3 Audio Adjustment 1 Press ACTION to display MAIN MENU. MAIN MENU Press ▲▼◄► to select “TV.” Press SET to display SET UP TV screen. DVD TV LOCK LANGUAGE CLOCK 4 5 6 7 CH Press SET to display SET UP TV screen. SET:SET Press ▲▼ to select “SET UP VIDEO/AUDIO.” Press SET to display SET UP VIDEO/AUDIO screen. DVD TV 4 5 CH SET:SET Press ▲▼ to select “SET UP VIDEO/AUDIO.” Press SET to display SET UP VIDEO/AUDIO screen.
Before using the VCR EJECT TV/VCR DISPLAY NUMBER keys ADD/DLT CH▲▼ STOP STILL/ PAUSE Insert a tape STOP / EJECT REC CH▲▼ REC Indicator PROG TIMER Indicator AUDIO REC PROG SPEED Before using VCR Functions 1 2 Confirm that tape is inserted. Press TV/VCR. Inserting a Tape 1 Insert a tape. • The unit power comes on automatically. Record tab To prevent tape jam, remove loose or peeling labels from tapes. Eject tape Press EJECT on the remote or STOP/EJECT on the unit.
Recording Television Programs Record On a Tape 1 2 3 Stop Recording Insert a tape with record tab. 1 • The unit power comes on automatically. Press STOP to stop recording. Press CH ▲▼ or NUMBER keys to Select Channel. • For “LINE” input, see page 16. Press SPEED to select recording speed. • Selected speed is displayed.
Timer Recording Review, Replace or Clear Program Contents : (Recording is not in progress) Set up to 8 Programs 1 You can set up to 8 programs to be recorded while you are away. 1 2 3 4 SET PROGRAM Press PROG to display SET PROGRAM screen. TIMER PROGRAMMING ON TIMER SLEEP TIMER: 0 Press ▲▼ to select “TIMER PROGRAMMING.” 2 3 SELECT: END :PROG SET PROGRAM Press PROG to display SET PROGRAM screen. TIMER PROGRAMMING ON TIMER SLEEP TIMER: 0 Press ▲▼ to select “TIMER PROGRAMMING.
Playing VCR Slow Motion picture EJECT TV/VCR POWER DISPLAY TRACKING NUMBER keys a. Press STILL/PAUSE. b. Press FF/SLOW+ (increases speed) or REW/SLOW(decreases speed) in Still mode. c. Press PLAY to release. Frame by Frame picture a. Press STILL/PAUSE. b. Press STILL/PAUSE in Still mode. c. Press PLAY to release. REW/SLOW- PLAY STOP FF/SLOW+ STILL/PAUSE CM / ZERO SEARCH AUDIO COUNTER RESET Notes: • These features work best in SLP mode.
Zero Search Index Search To quickly return to a specific tape counter location. 1 2 Search System is ... Each time a recording is made, an invisible index mark is placed on the tape. When timer recordings are made, program index and information are also included. These index marks can be used to access or scan recordings. Press DISPLAY during playback to display the Counter. Press COUNTER RESET at the desired position to reset to “0:00:00.
Commercial Skip Manual Tracking Control By pressing CM/ZERO in Playback mode you can skip over 1, 2, or 3 minutes of recorded tape as desired. 1 Press CM/ZERO repeatedly to select skip time in Playback mode. 1st Press 1 min skip 2nd Press 2 min skip OFF 3rd Press 3 min skip Use during Playback and Slow Motion mode to reduce picture noise. Press the 3 or 6 number key on the remote control or CH ▲▼ on the unit until the picture clears up.
Copy Your Tapes (Dubbing) Refer to page 10 “Connecting the “1, 2” Input Terminal” before you perform this operation. IMPORTANT Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement. Note: • Please note that some tapes cannot be dubbed on this unit. Also, it is not possible to dub DVD/CD/Video CD to VHS tape using this unit. Playback (Source) unit 1 Insert pre- recorded tape. Recording (Editing) unit Insert blank tape with record tab.
V-Chip Control Features 4 Press NUMBER keys to enter your secret code. • Take care that you are not observed entering the secret code. LOCK ENTER 4-DIGIT CODE NUMBER keys ACTION **-- ADD/DLT (CLEAR) ENTER :0-9 END :ACTION SELECT ▲▼◄►/ SET 5 Enter same code again for confirmation. LOCK CONFIRM 4-DIGIT CODE **** **** RECOGNIZED CHANGE CODE:ADD/DLT CONTINUE:SET END :ACTION To Make Corrections a. Press ◄ repeatedly to move the cursor. b. Press NUMBER keys to make the correction.
If LOCK menu is not displayed, perform “Enter Secret Code” steps on page 31. US TV PROGRAMS Ratings 1 US MOVIES Ratings 1 2 Press ▲▼ to select “US MOVIES.” • “NEXT PAGE” displays CANADIAN V-Chip settings menu. Please refer to page 33 for more details on Canadian tapes or broadcasts. Press SET to set “ON” or “OFF.” ON: V-Chip Control is activated. OFF: V-Chip Control is deactivated. Press SET to set “ON” or “OFF.” ON: V-Chip Control is activated. OFF: V-Chip Control is deactivated.
Canadian English Language Ratings 1 2 3 4 1 2 Press ▲▼ to select “NEXT PAGE.” Press SET to display screen. LOCK US MOVIES :OFF CHANGE SETTINGS US TV PROGRAMS :OFF CHANGE SETTINGS NEXT PAGE SELECT: END :ACTION SELECT: END :ACTION 3 4 Press SET to set “ON” or “OFF.
US MOVIES Ratings Chart G PG GENERAL AUDIENCE: All ages admitted. G General Audience PARENTAL GUIDANCE: Some material may not be suitable for children. 8 ANS + Not recommended for young children 13 ANS + Programming may not be suitable for children under the age of 13 RESTRICTED: Children under 17 must be accompanied by a parent or adult. 16 ANS + Programming is not suitable for children under the age of 16 OVER AGE 17 ONLY: No one 17 and under admitted.
Display Features TV/VCR Status & Clock Display 1 DISPLAY Press DISPLAY to display or remove the overlay. 5 1 2 3 4 REC 12:00PM CH 08 0:25 -0:12:34 STEREO SP SAP MONO RATING:PG-13 6 7 8 1 Function Status 2 Rec Time Remaining (OTR mode only, see page 25.) 3 Receivable Broadcast Types (See page 18.) 4 Rating level 5 Current Time 6 Channel 8 Tape Speed (See page 25.) Channel & Function Display When a function button is pressed (PLAY, FF, etc.
Basic Disc Operation OPEN / CLOSE POWER DVD DISPLAY NUMBER keys SELECT ▲▼◄►/ SET MENU 10 REW / SLOWSTOP STILL / PAUSE PLAY SKIP- Ι◄◄ SUB TITLE FF/SLOW+ TITLE SKIP+ ►►Ι POWER Insert disc SKIP- Ι◄◄ SKIP+ ►►Ι STOP PLAY OPEN / CLOSE AUDIO ZOOM RETURN If an interactive DVD*1 or a Video CD with playback control*2 is used and a Main MENU of disc appears, go to step 6. If a remote control button does not work when pressed, press the DVD button on the remote and try the button again.
• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by the unit or the disc. Auto-Power Off function Forward/Reverse Chapter/Track Skip DVD-V DVD-V CD VCD RAM DVD-RW (VR) Power turns off after unit is in stop mode with wallpaper displayed for about 5 minutes. 1 Using the NUMBER keys DVD-V CD VCD RAM DVD-RW (VR) CD VCD Press SKIP+ ►►Ι or SKIP- Ι◄◄during play.
RESUME Function Audio Soundtrack Language DVD-V DVD-V CD RAM DVD-RW (VR) The unit memorizes the point where STOP is pressed (STOP ► display on screen). Press PLAY to resume play from this point. Pressing STOP again or opening the tray cancels RESUME. However, RESUME is not canceled when power is turned off and on. Notes: • RESUME works only with discs for which elapsed play time is displayed during play.
• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by the unit or the disc. Vocal selection for Karaoke discs Information Display DVD-V DVD-V 1 2 3 VCD Press AUDIO in Play mode to display the audio screen. Yeah ! Yeah ! DVD Karaoke (1 vocal) VOCAL ON VOCAL OFF Video CD LR Press DISPLAY in Play or Stop mode to display “On-Screen Display.
DVD-RAM/DVD-RW (VR) Operation 6 OPEN / CLOSE POWER DVD Press PLAYLIST or D.NAVI to display Play List or Direct Navigator menu for easy title or scene selection. Example: Play List menu NUMBER keys SELECT ▲▼◄►/ SET Play List No. Recorded time length Page No. PLAYLIST Play List No. 10 PLAY STOP D.
• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by the unit or the disc. Play List Direct Navigator RAM RAM DVD-RW (VR) DVD-RW (VR) If the DVD-RAM/DVD-RW (VR) features a Play List, your preselected list of favorite scenes is displayed for easy access. (Operation can vary according to how you edited the DVD-RAM/ DVD-RW (VR).) If the DVD-RAM/DVD-RW (VR) features Direct Navigator, a list of recorded titles is displayed.
Disc Operation -Using Information Screenc.Disc currently being played: The type of disc currently inserted is displayed. d.Elapsed playing time: Go to a different scene by entering an elapsed playing time, then SET. DISPLAY NUMBER keys • This function does not work with +R/+RW and some discs. • If SET is pressed while making entries, unit returns to the condition before entries were made.
• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by the unit or the disc. Disc information screen 2 Disc information screen 3 CD 1 VCD Press DISPLAY in Play or Stop mode to display “On-Screen Display.” 1 TRACK:12 TIME :00:00:23 a Press DISPLAY in Play or Stop mode to display “On-Screen Display.” TRACK:12 TIME :00:35:12 PBC OFF a PROGRAM PLAY PROGRAM PLAY NEXT:DISPLAY NEXT:DISPLAY 2 Press SET to enter selected item.
• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by the unit or the disc. Disc information screen 4 Unit information screen 4 RAM RAM 1 2 DVD-RW (VR) Press DISPLAY in Play or Stop mode to display “On-Screen Display.” 1 Press ▲▼ to select an item. 2 PROGRAM: 2 TIME : 01:12:55 DVD-RW (VR) Press DISPLAY twice in Play or Stop mode to display “On-Screen Display.” Press SET to enter. Cursor moves to the right.
Special Disc Operation 6 7 Press ▲▼ to select “PROGRAM PLAY.” Press SET to display screen. DISPLAY PLAY MODE PROGRAM PLAY RANDOM PLAY NUMBER keys CLEAR SELECT SET END ACTION SELECT ▲▼◄►/ SET 8 Press ▲▼◄► to select a track number. (Track numbers on disc are displayed.) STOP ANGLE :▲ ▼ :SET :ACTION 9 VSS Press SET to set. • Repeat steps 8-9 to select another track. • The selected track is added on the right side.
Program Repeat Play CD 1 2 Random Play VCD CD VCD Tracks are played in random order. Do steps 1-11 on page 45. Press DISPLAY to display Disc Information screen. (Disc Information Screen) TRACK:12 TIME :00:00:23 1 2 3 Press ACTION in Stop mode to display MAIN MENU. Press ▲▼◄► to select “DVD.” Press SET to display DVD MAIN MENU. MAIN MENU DVD PROGRAM PLAY LOCK LANGUAGE NEXT:DISPLAY TV 3 Press DISPLAY again to display Unit Information screen.
• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by the unit or the disc. DVD Volume Adjust V.S.S. (Virtual Surround Sound) DVD-V DVD-V Some DVDs are recorded at lower than average volume levels. For these DVDs, this unit can be set so that the average volume is increased automatically. 1 2 3 Press ACTION to display MAIN MENU. Press ▲▼◄► to select “TV.” Press SET to display SET UP TV screen.
Settings for DVD Operation 6 7 Press ▲▼ to select an item. Press SET repeatedly for desired language. DISC LANGUAGES AUDIO SUBTITLE MENUS NUMBER keys SELECT SET END ACTION SELECT ▲▼◄►/ SET :English :AUTO :English :▲ ▼ :SET :ACTION AUDIO To select the audio soundtrack language. (Factory preset: English) English/Spanish/French/Japanese Original: Original disc language :Other language selection*1 Other SUBTITLE To select the subtitle language.
• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by the unit or the disc.
Selecting AUDIO OUTPUT DRC (Dynamic Range Compression) DVD-V OFF: Normal audio range is selected. (Factory preset) ON: For dynamic sound even at low volume. This is useful for latenight listening. [Dolby Digital DVDs only]. Select the digital output to be output from the optical digital audio output connector of the unit. 1 2 3 4 5 6 7 Press ACTION in Stop mode to display MAIN MENU. Press ▲▼◄► to select “DVD.” Press SET to display DVD MAIN MENU. Press ▲▼ to select “AUDIO OUTPUT.
• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by the unit or the disc. Selecting STILL MODE Selecting TV MODE DVD-V DVD-V Set to reduce jitter in a displayed still picture or a motion picture. Set the screen display style for widescreen video material playback. 1 1 2 3 Press ACTION in Stop mode to display MAIN MENU. 2 3 Press ▲▼◄► to select “DVD.” Press SET to display DVD MAIN MENU.
Warning and Instruction Displays These displays will alert you to a missed operation or provide further instructions. OSD CAUTION Page PLEASE SET CLOCK BY PRESSING ACTION KEY CHECK CASSETTE RECORD TAB TO CANCEL TIMER REC HOLD DOWN STOP KEY FOR APPROX 3 SEC If you attempt to set or review a Timer Recording or set the On-Timer and the Clock is not set... 14 If you press STOP during a Timer Recording... 26 NO CASSETTE If you press PLAY, FF, REW, or REC without a cassette inserted...
Before Requesting Service Check the following points once again if you are having trouble with your unit. PROBLEM CORRECTION Page Power No power… Completely insert Power Plug into an AC outlet. Set POWER button to ON. Power turns itself off... Auto power-off (shut off) occurs after about 5 min. in DVD mode with no operation, or if 35, 37 there is no broadcast signal in TV or Playback mode. Turn the power back on. No picture or sound... Monitor Poor picture with normal sound...
Guía rápida de uso en español IMPORTANTES PRECAUCIONES DE SEGURIDAD ADVERTENCIA PARA REDUCIR EL RIESGO DE GOLPES ELÉCTRICOS, INCENDIOS, HERIDAS O DAÑOS A ESTE PRODUCTO, LEA Y GUARDE TODAS LAS INSTRUCCIONES DE SEGURIDAD Y FUNCIONAMIENTO. TENGA EN CUENTA TODAS LAS ADVERTENCIAS INDICADAS EN EL MANUAL Y EN EL PRODUCTO. Instalación 1 Precauciones para los recursos de energía Opérelo solamente usando la fuente de energía indicada en el aparato o en este manual.
Conexión Notas sobre las conexiones • Desconecte la alimentación de todos los componentes antes de realizar cualquier conexión. • Si los cables necesarios para conectar un componente al sistema no están incluidos con el componente o disponibles opcionalmente, quizás deba adoptar un cable para que se adecue al componente involucrado. • Consulte cuidadosamente el manual de instrucciones de cada componente del sistema antes de conectarlo.
Selección del modo de entrada Uso del botón CH/VOL Seleccione el canal deseado: Presione CH ▲▼ o las teclas NUMBER. Método 1: Presione CH ▲▼. La exhibición cambiará de la siguiente manera. LINEA2 (TV) CH2 (CABLE) CH1 (TV) CH69 (CABLE) CH125 LINEA1 Método 2: Presione INPUT. La exhibición cambiará de la siguiente manera.
Grabación de una cinta Grabación con temporizador 1 Inserte una cinta con marca de grabación. • La alimentación de la unidad se conecta automáticamente. 2 Presione CH ▲▼ o las teclas NUMBER para seleccionar el canal. • Para entrada de “LINEA”, consulte la página 22. 3 Presione SPEED para seleccionar la velocidad de grabación (consulte la página 8). SP = Reproducción estándar SLP = Reproducción súper larga. • Se exhibe la velocidad seleccionada.
Funcionamiento del disco DVD-V Reproducir disco 1 Presione POWER en el control remoto o en la unidad. 2 Presione DVD para ajustar el modo remoto a DVD. 3 Presione OPEN/CLOSE. • Si ya está insertado un disco, vaya al paso 5. (Dependiendo del disco, la reproducción puede comenzar automáticamente.) 4 Coloque un disco en la bandeja de discos. • Sujete el disco por sus bordes solamente con el lado impreso hacia arriba y use las guías para colocarlo en la bandeja. Use un disco de 1 3″ (8 cm) o 2 5″ (12 cm).
Idioma de la banda sonora Lista de reproducción Navegador directo DVD-V RAM DVD-RW (VR) RAM DVD-RW (VR) Puede cambiar el idioma de la banda sonora, seleccionado en los ajustes de funcionamiento del DVD, a un idioma diferente, si está disponible. 1 Presione AUDIO en el modo de reproducción para exhibir la selección de audio en la pantalla. • La exhibición desaparece después de cinco segundos. SONIDO:1 ENG Dolby Digital 3/2.1ch I love you.
Limited Warranty PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way Secaucus, New Jersey 07094 PANASONIC SALES COMPANY, DIVISION OF PANASONIC PUERTO RICO, INC., AVE. 65 de Infantería, Km. 9.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes damages for lost time, cost of having someone remove or reinstall an installed unit if applicable, or travel to and from the servicer, loss of media or images, data or other memory or recorded content.
Specifications Display Picture Tube 20 inch, measured diagonally pure flat Picture Tube VCR Video Recording System Audio Track 4 rotary heads helical scanning system 1 track (Normal) 2 channel (Hi-Fi Audio Sound) Tuner Broadcast Channels VHF 2 ~ 13, UHF 14 ~ 69 CABLE Channels Midband A through I (14 ~ 22) Superband J through W (23 ~ 36) Hyperband AA ~ EEE (37 ~ 64) Lowband A-5 ~ A-1 (95 ~ 99) Special CABLE channel 5A (01) Ultraband 65 ~ 94, 100 ~ 125 General Power Source Power Consumption 120 V AC,
Index A Accessories ............................................. 2 ACTION button ........................................ 8 AC Power Plug ........................................ 9 ADD/DELETE/CLEAR button ................. 8 Add or Delete a Channel ........................14 ANGLE button ......................................... 8 Audio Adjustment .................................. 23 AUDIO button .......................................... 8 Audio Input Connector 1 .........................
LSQT1064 A Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way Secaucus, New Jersey 07094 Panasonic Sales Company (“PSC”), Division of Panasonic Puerto Rico, Inc. Ave. 65 de Infantería, Km. 9.
