Operating Instructions Air Conditioner Model No. Indoor Unit Outdoor Unit S-200PE4E S-250PE4E U-200PZH4E8 U-250PZH4E8 ENGLISH Before operating the unit, please read these operating instructions thoroughly and keep them for future reference. Before installation, the installer must: Read the Installation Instructions, then request the customer keep them for future reference.
Optional (For all indoor units) Thank you for purchasing Panasonic Air Conditioner. Table of Contents Safety Precautions .........3-12 To Learn More... ................ 13 Infrared Remote Controller (Part no.: CZ-RWS3) The receiver (Part no.: CZ-RWRC3) ECONAVI Sensor (Part no.: CZ-CENSC1) Cleaning the Air Conditioner ................... 13 Troubleshooting ............14-15 Information .........................
Safety Precautions To prevent personal injury, injury to others or property damage, please comply with the following: Incorrect operation due to failure to follow instructions below may cause harm or damage, the seriousness of which is classified as below: This appliances is not intended for accessibility by the general public. WARNING This sign warns of death or serious injury. CAUTION This sign warns of injury or damage to property.
Safety Precautions WARNING Indoor unit and outdoor unit This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
CAUTION WARNING Indoor unit and outdoor unit Do not wash the indoor unit with water, benzine, thinner or scouring powder to avoid damage or corrosion at the unit. Do not use for preservation of precise equipment, food, animals, plants, artwork or other objects. This may cause quality deterioration, etc. Do not use any combustible equipment in front of the airflow outlet to avoid fire propagation. Do not expose plants or pet directly to airflow to avoid injury, etc.
Safety Precautions The mixing of different refrigerants within a system is prohibited. Models that use refrigerant R32 and R410A have a different charging port thread diameter to prevent erroneous charging with refrigerant R22 and for safety. Therefore, check beforehand. [The charging port thread diameter for R32 and R410A is 1/2 inch.] Must always ensure that foreign matter (oil, water, etc.) does not enter the piping. Also, when storing the piping, securely seal the opening by pinching, taping, etc.
1. Installation (Space) • Product with flammable refrigerants, shall be installed according to the minimum room area, Amin (m²) mentioned in Installation Instructions. • In case of field charge, the effect on refrigerant charge caused by the different pipe length has to be quantified, measured and labelled. • Must ensure the installation of pipe-work shall be kept to a minimum. Avoid use dented pipe and do not allow acute bending.
Safety Precautions 2-4. Presence of fire extinguisher • If any hot work is to be conducted on the refrigerating equipment or any associated parts, appropriate fire extinguishing equipment shall be available at hand. • Have a dry powder or CO2 fire extinguisher adjacent to the charging area. 2-5.
2-8. Checks to electrical devices • Repair and maintenance to electrical components shall include initial safety checks and component inspection procedures. • Initial safety checks shall include but not limit to:- That capacitors are discharged: this shall be done in a safe manner to avoid possibility of sparking. - That there no live electrical components and wiring are exposed while charging, recovering or purging the system. - That there is continuity of earth bonding.
Safety Precautions 7. Refrigerant removal and circuit evacuation • When breaking into the refrigerant circuit to make repairs – or for any other purpose – conventional procedures shall be used. However, it is important that best practice is followed since flammability is a consideration.
9. Decommissioning • Before carrying out this procedure, it is essential that the technician is completely familiar with the equipment and all its details. • It is recommended good practice that all refrigerants are recovered safely. • Prior to the task being carried out, an oil and refrigerant sample shall be taken in case analysis is required prior to re-use of recovered refrigerant. • It is essential that electrical power is available before the task is commenced.
Safety Precautions • The recovery equipment shall be in good working order with a set of instructions concerning the equipment that is at hand and shall be suitable for the recovery of flammable refrigerants. Consult manufacturer if in doubt. • In addition, a set of calibrated weighing scales shall be available and in good working order. • Hoses shall be complete with leak-free disconnect couplings and in good condition.
To Learn More... To enjoy fresher and cleaner environment • nanoeTMX automatically starts when the unit is turned on. • This operation can be activated even when the unit is OFF. • If a power failure occurs during this operation, this operation resumes immediately when power resumes. Energy saving temperature setting You may save energy when operating the unit within the recommended temperature range. HEAT : 20 °C ~ 24 °C / 68 °F ~ 75 °F. COOL: 26 °C ~ 28 °C / 79 °F ~ 82 °F.
Troubleshooting The following symptoms do not indicate malfunction. Symptom The system is not turn on or respond to remote controller immediately after power on. *Please wait a moment (5min/15sec) after power on the system. Cause • For new product first time power on after installation, the system requires approximately 5 minutes for “System Auto configuration Process”. • For subsequent operation start up by power switch, the system requires 15secs for “Program Initialization”.
When... ■ Conducting a seasonal inspection after extended period of non-use • Check that there is no obstruction around the air inlets and outlet vents. • These units are mounted inside the ceiling. It uses external air intake vent and air outlet vent to operate. Please consult your nearest dealer for seasonal inspection. • After 15 minutes of operation, it is normal to have the following temperature difference between the air inlet and outlet vents: HEAT: ≥ 14°C / 25.2°F COOL: ≥ 8°C / 14.
Information Information for Users on Collection and Disposal of Old Equipment and Used Batteries Pb These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.
Declaration Of Conformity (DOC) Hereby, "Panasonic Corporation" declares that this product is in compliance with the essential requirements and other relevant provisions of the relevant statutory requirements. The full text of the declaration of conformity is available at the following internet address: http://www.ptc.panasonic.
