Operation Manual

VQT4Z21
8
8
ENGLISH
∫ Note for the iOS version
After step 3
1 Enter the password for the home wireless network
to which the iOS device is connected.
2 When a message instructing you to connect the iOS
device to this system is displayed, press the home
button.
3 On the Wi-Fi network selection screen in “Settings”,
select “00 Setup _ _ _ _ _ _”.
• “ _ ” stands for a digit that is unique to each set.
4 When a message indicating the completion of the
connection to this system is displayed, restart the
app.
5 When a message indicating the completion of the
Wi-Fi setup of this system is displayed, close the
app, and then check the operation of AirPlay, etc.
• “Panasonic Stereo System Network Setup” for Mac OS is
also available at the Mac App Store.
With this method, you will access this system’s wireless
network settings from the Internet browser of your
compatible device.
• The following explanations are based on an iPhone.
1 Press [SETUP] on the remote control repeatedly
to select “Net Setup” and then press [OK].
“With iPod” is indicated on the display.
2 Press [SETUP] on the remote control repeatedly
to select “Manual” and then press [OK].
“Setting” blinks on the display.
3 After “Setting” blinks, connect your compatible
device to this system’s wireless network named
“00 Setup _ _ _ _ _ _”.
• “ _ ” stands for a digit that is unique to each set.
• Make sure that DHCP is enabled for the network
setting on your compatible device.
4 Start the Internet browser on your compatible
device and type “http://192.168.1.12/” into the
URL address field and display the page.
This system’s setup window is displayed.
• Examples of Internet browsers
iOS device/Mac : Safari
Android device : Google Chrome™
PC : Windows Internet Explorer
5 Select “Search wireless network”.
6 Select and input the details.
• Check your home wireless network name (Network
name (SSID)) and password for this network. This can
often be found on the wireless network router itself.
7 Select “JOIN” to apply the settings.
• In the pop-up screen, select “OK” to continue.
• Select “Cancel” to return to the setup window.
8 The settings are completed when “Success” is
displayed.
“ ” is indicated on the display.
9 Make sure to connect your compatible device
back to your home wireless network.
*1: If you have set your wireless network to be invisible,
select “BACK” and refer to “Alternative settings”. (> 9)
Method 4
Setting the network connection from an Internet
browser.
[1] Select your home wireless network
name.*
1
[2] Type the password.
If “Fail” is displayed press [OK], check the wireless
network password and other settings and start again
from step 1.
SC-PMX9EG-VQT4Z21.book 8 ページ ２０１３年３月２２日 金曜日 午後４時５４分