Operation Manual

31
Specifi cations
TH-37PA50E, TH-37PA40E TH-42PA50E, TH-42PA40E
Power Source AC 220-240 V, 50 / 60 Hz
Power Consumption
Average use : 245 W
Standby condition : 0.3 W
Average use : 315 W
Standby condition : 0.3 W
Plasma Display panel
Drive method
AC type
Aspect Ratio
16:9
Contrast Ratio
4000:1
Screen size
(No.of pixels)
37-inch 42-inch
818 mm (W)
×
461 mm (H)
×
939 mm (diagonal) 920 mm (W) × 518 mm (H) × 1,056 mm (diagonal)
408,960 (852 (W) × 480 (H)) [2,556 × 480 dots]
Sound
Speaker
12 cm
×
6 cm
×
2 pcs, 6 Ω
Audio Output
16 W (8 W + 8 W ), 10% THD
Applicable signals
Colour System
NTSC, PAL, PAL60, SECAM, Modifi ed NTSC
Scanning format
480i(60Hz), 480p(60Hz), 576i(50Hz), 576p(50Hz), 720p(50Hz), 720p(60Hz), 1080i(50Hz), 1080i(60Hz)
Receiving Systems /
Band name
PAL B, G, H, SECAM B, G SECAM L / L’
VHF E2 - E12 VHF H1 - H2 (ITALY)
VHF A - H (ITALY) UHF E21 - E69
CATV (S01 - S05) CATV S1 - S10 (M1 - M10)
CATV S11 - S20 (U1 - U10) CATV S21 - S41 (Hyperband)
PAL D, K, SECAM D, K
VHF R1 - R2 VHF R3 - R5
VHF R6 - R12 UHF E21 - E69
PAL 525/60 Playback of NTSC tape from some PAL Video re cord ers (VCR)
M.NTSC Playback from M. NTSC Video recorders (VCR)
NTSC (AV input only) Playback from NTSC Video recorders (VCR)
Aerial - Rear
UHF / VHF
Operating Conditions
Temperature : 0 °C - 40 °C
Humidity : 20 % - 80 % RH (non-condensing)
Connection Terminals
AV1 (Scart connecter)
21 Pin terminal (Audio/Video in, Audio/Video out, RGB in)
AV2 (Scart connecter)
21 Pin terminal (Audio/Video in, Audio/Video out, S-Video in, Q-Link)
AV3 (Scart connecter)
21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, S-Video in, Q-Link)
COMPONENT
VIDEO Y 1.0 Vp-p (including synchronization)
P
B, PR ±0.35 Vp-p
AUDIO L - R
RCA PIN Type
×
2 0.5 Vrms
Output AUDIO L - R
RCA PIN Type
×
2 0.5 Vrms (high impedance)
Dimensions ( W × H × D )
968 mm
×
641 mm
×
96.5 mm 1,068 mm
×
701 mm
×
96.5 mm
Weight
28.5 kg Net 33 kg Net
Notes:
• Design and Specifi cations are subject to change without notice. Weight and Dimensions shown are approximate.
• This equipment complies with the EMC standards listed below.
EN55013, EN61000-3-2, EN61000-3-3, EN55020.