Operating Instructions

7
ENGLISH
Tips for Energy Saving
Attention:

Never use your hands to move the fl ap (vertical airfl ow fl ap)
controlled using the remote controller.
Note

When the air conditioner is turned off, the fl ap automatically
moves toward the direction of closing.

The fl ap (vertical airfl ow fl ap) moves to the upward position
during standby operation for heating.

The swing operation starts after the standby operation has
fi nished, but “Swing” is indicated on the remote controller
even during the standby operation.

Avoid

Do not block the air intake and outlet of the unit.
(If either is obstructed, the unit will not function
well, causing malfunction.)

During cooling operation, use sunshades, blinds or cur-
tains to prevent direct sunlight from entering the room.

Do

Always keep the air fi lter clean.
(A clogged fi lter will impair the performance of the unit.)
 “Maintenance” (P.8)

To prevent conditioned air from escaping, keep win-
dows, doors and any other openings closed.
Adjusting airfl ow direction
for multiple indoor units (Timer remote controller only)

When setting the airfl ow direction of
each indoor unit individually
1
Press to select the Unit No.
for adjustment.
2
Press to select your desired
airfl ow direction.

When setting the airfl ow direction of
all indoor units at the same time
1
Press to select
No display
.
2
Press to select your desired
airfl ow direction.
1-1
1-2
1-3
1-4
1-8
“UNIT” button
“FLAP” button

Maximum of
8 indoor units
can be connected.
Unit No.
When operating multiple indoor units using 1 remote controller, airfl ow direction can be adjusted for indoor each unit individually or
all units at the same time.
e.g.) 1 outdoor unit
and
8 indoor units
No display
1-1
1-2
1-3
1-4
2-1
2-4
e.g.) 2 outdoor units
and
4 indoor units
No display
1-1
1-2
1-3
1-4
1-8
OI_00_F569616_EU.indb 7OI_00_F569616_EU.indb 7 2014/02/28 9:31:032014/02/28 9:31:03