Operating instructions

5
HRVATSKI
ENGLISH
5
SETTING UP THE SPECIAL FUNCTIONS
• After initial installation, you can manually adjust the settings. The initial setting remains active until the user changes it.
• The control panel can be used for multiple installations. Some functions may not be applicable to your unit.
• Ensure the operation LED is in OFF condition before setting.
TIMER OUTDOOR
HEAT
SETTING
STATUS
PUMPDW
BOOSTER
QUIET
TANK
WATER OUTLET
HEATER
OPERATION
FORCE
HEATER
ACTUAL
Day display
YES / NO / Temperature display
SETTING / STATUS indicatorFunctions*
Timer display
Operation
Mode
Actual Operation
SET
SELECT
CANCEL
SETTING
STATUS
SEARCH
CHECK
SELECT FUNCTIONS AND SET YOUR DESIRED TIMER
1. Press
SET
and
CHECK
simultaneously for 5 seconds to enter special setting mode. “SETTING” and “STATUS” indicator is ON.
2. Press
or to browse functions.
3. Press
SELECT
to enter the function.
4. Press
or to enable YES or disable NO function, or set your desired day and time.
5. Press
SET
to con rm.
Function *
Operation Mode/
Actual Operation
Description
External Thermo Controller (YES / NO)
To set external thermo controller connection.
TANK
Tank Connection (YES / NO)
To set tank connection.
SOLAR
Solar Priority (YES / NO)
To choose the solar use for water tank heat up.
HEAT
Heating Priority (YES / NO)
To choose the heat pump only use for Heating side during HEAT + TANK mode.
HEAT
Heating Heat-up Interval Set
To set timer for Heating during HEAT + TANK mode (0.5hour ~ 10hours).
TANK
Tank Heat-up Interval Set
To set timer for Tank during HEAT + TANK mode (5minutes ~ 1hour 35minutes).
BOOSTER
Booster Heater Delay Time Set
To set delay timer for booster heater to ON if tank temperature is not reached (20minutes ~ 1hour
35minutes).
Sterilization (YES / NO)
To set sterilization, if required.
Sterilization Day & Time Set
To set timer for sterilization (only once a week).
Sterilization Temperature Set
To set temperature for sterilization function (40°C ~ 75°C).
Sterilization Continue Time
To set timer to maintain heating temperature in order to complete the sterilization function
(5minutes ~ 1hour).
CAUTION
Do not use the system
during sterilization
to prevent burnt or
overheat during shower.
Prikaz datuma
Funkcije*
Stvarni rad
Prikaz brojača
Način rada
Prikaz temperature / DA/ NE
Pokazatelj SETTING/STATUS (postavke/status)
ENGLISH
5
SETTING UP THE SPECIAL FUNCTIONS
• After initial installation, you can manually adjust the settings. The initial setting remains active until the user changes it.
• The control panel can be used for multiple installations. Some functions may not be applicable to your unit.
• Ensure the operation LED is in OFF condition before setting.
TIMER OUTDOOR
HEAT
SETTING
STATUS
PUMPDW
BOOSTER
QUIET
TANK
WATER OUTLET
HEATER
OPERATION
FORCE
HEATER
ACTUAL
Day display
YES / NO / Temperature display
SETTING / STATUS indicatorFunctions*
Timer display
Operation
Mode
Actual Operation
SET
SELECT
CANCEL
SETTING
STATUS
SEARCH
CHECK
SELECT FUNCTIONS AND SET YOUR DESIRED TIMER
1. Press
SET
and
CHECK
simultaneously for 5 seconds to enter special setting mode. “SETTING” and “STATUS” indicator is ON.
2. Press
or to browse functions.
3. Press
SELECT
to enter the function.
4. Press
or to enable YES or disable NO function, or set your desired day and time.
5. Press
SET
to con rm.
Function *
Operation Mode/
Actual Operation
Description
External Thermo Controller (YES / NO)
To set external thermo controller connection.
TANK
Tank Connection (YES / NO)
To set tank connection.
SOLAR
Solar Priority (YES / NO)
To choose the solar use for water tank heat up.
HEAT
Heating Priority (YES / NO)
To choose the heat pump only use for Heating side during HEAT + TANK mode.
HEAT
Heating Heat-up Interval Set
To set timer for Heating during HEAT + TANK mode (0.5hour ~ 10hours).
TANK
Tank Heat-up Interval Set
To set timer for Tank during HEAT + TANK mode (5minutes ~ 1hour 35minutes).
BOOSTER
Booster Heater Delay Time Set
To set delay timer for booster heater to ON if tank temperature is not reached (20minutes ~ 1hour
35minutes).
Sterilization (YES / NO)
To set sterilization, if required.
Sterilization Day & Time Set
To set timer for sterilization (only once a week).
Sterilization Temperature Set
To set temperature for sterilization function (40°C ~ 75°C).
Sterilization Continue Time
To set timer to maintain heating temperature in order to complete the sterilization function
(5minutes ~ 1hour).
CAUTION
Do not use the system
during sterilization
to prevent burnt or
overheat during shower.
POSTAVLJANJE POSEBNIH FUNKCIJA
• Nakon početne instalacije moguće je ručno prilagoditi postavke. Početna postavka ostaje aktivna sve dok je korisnik ne promijeni.
• Upravljačku je ploču moguće koristiti za višestruke instalacije. Neke od funkcija možda se neće moći primijeniti na vaš uređaj.
• Prije postavljanja postavki uvjerite se da LED svjetlo koje označava uključenost/isključenost uređaja ne svijetli.
1. U isto vrijeme pritisnite i držite 5 sekundi gumbe i da biste unijeli način posebnih postavki. Uključen je pokazatelj
"SETTING" (postavka) i "STATUS" (status).
2. Pritisnite ili da biste pregledali funkcije.
3. Pritisnite da biste unijeli funkcije.
4. Pritisnite ili da biste omogućili funkciju YES (Da) ili onemogućili funkciju NO (Ne) ili postavili željeni datum i vrijeme.
5. Pritisnite da biste potvrdili.
Funkcija *
Način rada/
Stvarni rad
Opis
Vanjski termostat (YES/NO (da/ne))
Postavljanje vanjske veze s termostatom.
SPREMNIK
Veza sa spremnikom (YES / NO)
Postavljanje veze sa spremnikom.
SOLARNI
Solarni prioritet (YES / NO)
Odabir solarnog načina zagrijavanja vode iz spremnika s vodom.
GRIJANJE
Prioritet grijanja (YES / NO)
Odabir načina korištenja samo toplinske crpke za grijanje u načinima HEAT + TANK (grijanje + spremnik).
GRIJANJE
Postavljanja intervala zagrijavanja kod grijanja
Postavljanje brojača grijanja u načinu HEAT + TANK (0,5 sati ~ 10 sati).
SPREMNIK
Postavljanja intervala zagrijavanja za spremnik
Postavljanje brojača za spremnik u načinu HEAT + TANK (5 min ~ 1 sat i 35 min)
DODATNI
Postavljanje odgođenog vremena za dodatni grijač
Postavljanje brojača s odgodom za uključivanje dodatnog grijača (ON) ako se ne postigne
temperatura spremnika (20 min ~ 1 sat i 35 min)
Sterilizacija (YES / NO)
Postavljanje sterilizacije, ako je potrebna.
Postavke vremena i datuma sterilizacije
Postavljanje brojača za funkciju sterilizacije
(samo jednom tjedno)
Postavke temperature na kojoj se provodi sterilizacija
Postavljanje temperature za funkciju sterilizacije (40°C ~ 75°C).
Vrijeme trajanja sterilizacije
Postavljanje brojača radi održavanja temperature za grijanje da bi se dovršila funkcija
sterilizacije (5 min ~ 1 sat).
ODABERITE FUNKCIJE I POSTAVITE ŽELJENI BROJAČ
Nemojte koristiti sustav
tijekom sterilizacije. Tako
ćete spriječiti opekline ili
pregrijavanje tijekom tuširanja.
OPREZ