Network Operating Instructions Network Interface Unit WJ-NT314

14
Step 3
Move the current directory to "sd_data" and obtain images.
Note:
• When logging in the unit, each directory will be displayed. Images on the SD memory card can be found in the
"sd_data" directory. Move to the "sd_data" directory and obtain images.
<Directory structure of "sd_data">
To obtain the image (img_0107010101230000.jpg) using the Windows command prompt
q Enter "c:\>ftp 192.168.0.10" and press the [Enter] key.
FTP connection will be established with "192.168.0.10".
w Log in by entering the user name and the password.
e Enter "ftp> cd sd_data/ftp/070101/0123" and press the [Enter] key.
→ The current directory will be "sd_data/070101/0123".
r The transfer mode will be set to the binary mode. Enter "ftp> bin" and press the [Enter] key.
t Obtain the image. Enter "ftp> get img_0107010101230000.jpg" and press the [Enter] key.
→ The image will be obtained.
y Log out by entering "ftp> bye" and press the [Enter] key.
→ You will log out of the "FTP" directory.
• It is possible to delete images on the SD memory card using the Windows command prompt, etc.
ftpsd_data
log
070101
070102
0123
Directory
Directory
(year/month/day)
Directory
(hour/minute)
:
:
:
:
:
:
:
:
← Destination of logs to be saved
↑ The image will be saved here.
An image failed to transmit by the FTP
periodic transmission function
(Ex. img_010701010123000.jpg)