Network Operating Instructions Network Interface Unit WJ-NT314
Table Of Contents
- Preface
- Monitor Images on a PC
- Action at an Alarm Occurrence
- About the image recognition function
- Transmit Images onto an FTP Server
- About the Network Security of This Unit
- Display the Setup Menu and Configure the Settings of the Unit using a PC
- How to display the setup menu
- How to operate the setup menu
- Configure the basic settings of the unit [Basic setup]
- Configure the settings relating to images and audio [Camera setup]
- Configures the multi-screen settings [Multi-screen setup]
- Configure the AVMD settings [Video analytics setup]
- Configure the alarm settings [Alarm setup]
- Configure the settings relating to the authentication [Authentication setup]
- Configure the settings of the servers [Server setup]
- Configuring the network settings [Network setup]
- Maintenance of the unit [Maintenance]
- About the Displayed System Log
- Troubleshooting
35
Notes:
• Color in the ( ) beside the icon is the color to display
the detection area.
• Select a parameter from "P1 (Blu)" to "P3 (Yel)"
when setting an area to detect an intruder. Alarm
occurs when a moving object enters the area. It may
take around 2 seconds since the person is detected
until the alarm occurs.
• Select "P (Bro)" when setting an area to detect the
object abandonment or removal. Alarm occurs when
an object is taken into the area or when the object is
taken away from the area.
• To detect the object abandonment or removal, it is
necessary to shoot the background around 2 min-
utes to memorize the image before the object is
abandoned or removed. When the detection condi-
tion changes and a camera moves to the selected
preset positions according to the schedule, detection
of abandoned or removed objects is not activated
around 2 minutes.
• Select "P (Bla)" when setting an area not to activate
AVMD.
Even moving objects are not detected in the area.
w Select the shape of frame by clicking "Paint quad-
rangle detection area" or "Paint polygon detection
area" of "Paint type".
e When selecting "Paint quadrangle detection area",
set a square area by dragging the mouse on the
screen. When selecting "Paint polygon detection
area", set a polygonal area by designating the apex-
es on the screen. (It is possible to designate up to
16 apexes.) The detection area is painted by con-
necting start points and end points.
Note:
When deleting the detection area, click the "Select
painted detection area" icon, select the frame on the
screen by the mouse, and click the [CLEAR] button.
r After setting all the areas, check the [Valid] of
desired areas.
Important:
Alarm will not occur even when an area is set with-
out checking the [Valid].
Step 6
After completing the detection area settings, perform the
depth correction.
Click the [BSET] button to move to the "Depth correc-
tion" menu. (☞ page 36)