Network Operating Instructions Network Interface Unit WJ-NT314
Table Of Contents
- Preface
- Monitor Images on a PC
- Action at an Alarm Occurrence
- About the image recognition function
- Transmit Images onto an FTP Server
- About the Network Security of This Unit
- Display the Setup Menu and Configure the Settings of the Unit using a PC
- How to display the setup menu
- How to operate the setup menu
- Configure the basic settings of the unit [Basic setup]
- Configure the settings relating to images and audio [Camera setup]
- Configures the multi-screen settings [Multi-screen setup]
- Configure the AVMD settings [Video analytics setup]
- Configure the alarm settings [Alarm setup]
- Configure the settings relating to the authentication [Authentication setup]
- Configure the settings of the servers [Server setup]
- Configuring the network settings [Network setup]
- Maintenance of the unit [Maintenance]
- About the Displayed System Log
- Troubleshooting
38
Set the AVMD schedule [Schedule]
Click the [Schedule] tab on the "Video analytics setup" page.(☞ page 34)
It is possible to set the schedule for each detection program.
For example, to monitor the entrance and exit, it is possible to set the detection program for the entrance between 6
a.m. and 12 a.m. on Monday to Friday, and for the exit between 4 p.m. and 12 p.m. on Monday to Friday.
How to configure the schedule settings
Step 1
Select the schedule number from "Schedule 1" to
"Schedule 8".
Step 2
Check the check box of the desired day of the week.
→ The selected day of the week will be validated for the
schedule.
Step 3
To designate time, click [i] and select the desired
"hour" and "minute".
When not designating time, check the checkbox of "24
hours".
Available value: 00:00 – 23:59
Step 4
Select the detection program.
→ The channel number set for the selected detection
program will be displayed in "CH No.".
Step 5
Click the [SET] button after completing the settings.
Step 6
To check the schedule on the time bar, click [i] and
select the channel number (detection program) from the
[CH No.] pull-down menu.
→ The schedule of detection program set for the select-
ed channel will be displayed on the time bar. The col-
ors of time bar differ depending on detection pro-
grams. (The colors are displayed beside [CH No.])