Network Operating Instructions Network Interface Unit WJ-NT314
Table Of Contents
- Preface
- Monitor Images on a PC
- Action at an Alarm Occurrence
- About the image recognition function
- Transmit Images onto an FTP Server
- About the Network Security of This Unit
- Display the Setup Menu and Configure the Settings of the Unit using a PC
- How to display the setup menu
- How to operate the setup menu
- Configure the basic settings of the unit [Basic setup]
- Configure the settings relating to images and audio [Camera setup]
- Configures the multi-screen settings [Multi-screen setup]
- Configure the AVMD settings [Video analytics setup]
- Configure the alarm settings [Alarm setup]
- Configure the settings relating to the authentication [Authentication setup]
- Configure the settings of the servers [Server setup]
- Configuring the network settings [Network setup]
- Maintenance of the unit [Maintenance]
- About the Displayed System Log
- Troubleshooting
52
Notes:
• To access the unit via the Internet by connecting the unit to a broadband router, it is necessary to assign a
respective port number for each device and address translation by using the port forwarding function. For further
information, refer to the operating instructions of the broadband router in use.
• The port forwarding function changes a global IP address to a private IP address, and "Static IP masquerade"
and "Network Address Translation (NAT)" have this function. This function is to be set in a router.
Enter [Global IP address +:
(colon) + port number] in the
"Address" box of the browser
via the Internet.
Global address
for the WAN
vvv.xxx.yyy.zzz
Private address for the LAN
192.168.0.254
vvv.xxx.yyy.zzz:82
vvv.xxx.yyy.zzz:81
Broadband router
Internet
(WAN)
Cable modem
xDSL modem
Address translation using the port
forwarding function
vvv.xxx.yyy.zzz:82 → 192.168.0.2:82
Address translation using the port
forwarding function
vvv.xxx.yyy.zzz:81 → 192.168.0.1:81
Private address
192.168.0.2
Port number: 82
Private address
192.168.0.1
Port number: 81