Network Operating Instructions Network Interface Unit WJ-NT314
Table Of Contents
- Preface
- Monitor Images on a PC
- Action at an Alarm Occurrence
- About the image recognition function
- Transmit Images onto an FTP Server
- About the Network Security of This Unit
- Display the Setup Menu and Configure the Settings of the Unit using a PC
- How to display the setup menu
- How to operate the setup menu
- Configure the basic settings of the unit [Basic setup]
- Configure the settings relating to images and audio [Camera setup]
- Configures the multi-screen settings [Multi-screen setup]
- Configure the AVMD settings [Video analytics setup]
- Configure the alarm settings [Alarm setup]
- Configure the settings relating to the authentication [Authentication setup]
- Configure the settings of the servers [Server setup]
- Configuring the network settings [Network setup]
- Maintenance of the unit [Maintenance]
- About the Displayed System Log
- Troubleshooting
57
Maintenance of the unit [Maintenance]
System log check, firmware upgrade, and initialization of the setup menu can be performed on this page.
The "Maintenance" page has 3 tabs of the [System log] tab, the [Upgrade] tab and the [Initialization] tab.
Check the system log [System log]
Click the [System log] tab of the "Maintenance" page.
Up to 320 KB (approx. 4 000 logs) system logs can be saved on the SD memory card when the SD memory card is
inserted after selecting "Use" for "SD memory card" on the [SD memory card] tab (☞ page 23).
When "Not use" is selected for "SD memory card", up to 8 KB (approx. 100 logs) system logs can be saved on the
built-in memory of the unit.
When the saved system logs have reached the capacity, the newer logs will overwrite the older system logs.
The system logs will be displayed in 100 logs each.
When using the SD memory card, the logs will be saved even when the power of this unit is turned off. When not
using the SD memory card, the logs will be deleted when the power of this unit is turned off.
80 KB of system log is periodically overwritten every 5 minutes.
Considering the system log occurs periodically, it is recommended to maintain the SD memory card approx. 5 MB or
more.
• When using the SD memory card, saving the system logs will be stopped when the SD memory card becomes
full.
In this case, format the SD memory card. (☞ page 24) Or make the remaining space on the SD memory card,
select "Not use" for "SD memory card" on the [SD memory card] tab (☞ page 23), and select "Use" again.
(To notify that the SD memory card becomes full, perform the Panasonic alarm protocol setup. (☞ page 45)
[Time & date]
Time and date at the error occurrence will be displayed.
[Error message]
The descriptions about the error will be displayed.
Refer to page 60 for further information about the sys-
tem logs.