Network Operating Instructions Network Interface Unit WJ-NT314

65
Is the SD memory card formatted?
When the power is shut down while saving images on
the SD memory card because of power failure, etc., it
may become impossible to write data on the SD
memory card. In such a case, format the SD memory
card after obtaining the images saved on the card.
Isnt the SD memory card out of order?
There are limited times to overwrite on an SD memory
card. When frequently overwritten, it may be at the
end of product life. It is recommended to replace the
SD memory card.
Is the SD memory card inserted correctly?
Isnt the write protect switch set to "LOCK"?
When the write protect switch is set to "LOCK", avail-
able size/total size indication of the SD memory card
will be "**********KB/**********KB".
Operating
Instructions
24
Images cannot be saved on
the SD memory card.
"SD-MEMORY NOT
DETECTED" is notified in the
message of Panasonic alarm
protocol.
Is "ON" selected for "Super Dynamic 3" ?
Set to "OFF".
When flickers appear frequently, set the shutter speed
to "AUTO" or "1/100".
Are objects hard to focus on with the auto focus func-
tion?
Adjust the focus manually.
Is there dust or dirt on the transparent part (over the
lens) of the dome cover (camera shell)?
Clean the transparent part of the dome cover.
Cannot adjust the focus cor-
rectly.
Operating
Instructions of
camera
6
Flicker appears on the
screen.
Page 30 and
Operating
Instructions of
camera
Page 30 and
Operating
Instructions of
camera
Reference
pages
Cause/solution
Symptom
Is the brightness setting set at an appropriate level?
Click the [RESET] button of "BRIGHTNESS".
Is the brightness setting set at an appropriate level?
Click the [RESET] button of "BRIGHTNESS".
No image is displayed (or too
dark).
Images are displayed
washed out.
6
6