Network Operating Instructions Network Interface Unit WJ-NT314
Table Of Contents
- Preface
- Monitor Images on a PC
- Action at an Alarm Occurrence
- About the image recognition function
- Transmit Images onto an FTP Server
- About the Network Security of This Unit
- Display the Setup Menu and Configure the Settings of the Unit using a PC
- How to display the setup menu
- How to operate the setup menu
- Configure the basic settings of the unit [Basic setup]
- Configure the settings relating to images and audio [Camera setup]
- Configures the multi-screen settings [Multi-screen setup]
- Configure the AVMD settings [Video analytics setup]
- Configure the alarm settings [Alarm setup]
- Configure the settings relating to the authentication [Authentication setup]
- Configure the settings of the servers [Server setup]
- Configuring the network settings [Network setup]
- Maintenance of the unit [Maintenance]
- About the Displayed System Log
- Troubleshooting
66
• Check the settings for the self return function.
• Confirm that the camera is connected correctly and
firmly.
• Confirm that the connected camera is available for the
desired operation.
Depending on the models of the connected cameras,
the available functions may be different.
Refer to the operating instructions of the connected
camera for further information.
Reference
pages
Cause/solution
Symptom
The AUTO MODE (OFF,
auto pan, sort, sequence,
patrol) of the camera
changes.
Page 30 and
Operating
Instructions of
camera
Operating
Instructions
Operating
Instructions of
camera
Cannot control the camera.
• Is the viewer software installed on a PC?
Confirm that the viewer software "Network Camera
View3" is installed.
Is the audio mode set correctly?
• To receive and transmit audio, select "Interactive" for
"Audio mode" on the [Audio] tab.
• Are you accessing with the access level that can
receive and transmit audio?
• Access with the access level selected for
"Authentication" on the [Audio] tab.
• Are images displayed on a full screen?
Audio will not be transmitted when displaying images
on a full screen.
Operating
Instructions
31
7
• Are the microphone and the speaker connected cor-
rectly and firmly?
Confirm that they are connected correctly and firmly.
• Is the audio volume of PC or speaker set at an appro-
priate level?
Increase the audio volume level.
Cannot receive audio from
the unit./Cannot transmit
audio to the unit.
Operating
Instructions
–