Network Operating Instructions Network Interface Unit WJ-NT314
Table Of Contents
- Preface
- Monitor Images on a PC
- Action at an Alarm Occurrence
- About the image recognition function
- Transmit Images onto an FTP Server
- About the Network Security of This Unit
- Display the Setup Menu and Configure the Settings of the Unit using a PC
- How to display the setup menu
- How to operate the setup menu
- Configure the basic settings of the unit [Basic setup]
- Configure the settings relating to images and audio [Camera setup]
- Configures the multi-screen settings [Multi-screen setup]
- Configure the AVMD settings [Video analytics setup]
- Configure the alarm settings [Alarm setup]
- Configure the settings relating to the authentication [Authentication setup]
- Configure the settings of the servers [Server setup]
- Configuring the network settings [Network setup]
- Maintenance of the unit [Maintenance]
- About the Displayed System Log
- Troubleshooting
![](/manual/panasonic/wj-nt314-1/network-operating-instructions-network-interface-unit-wj-nt314/images/img-67.png)
67
• Is the viewer software installed on a PC?
Confirm that the viewer software "Network Camera
View3" is installed.
The mic input button and the
audio output button on the
"Live" page do not display
the current status in real
time.
Operating
Instructions
• Does your PC meet the system requirements to oper-
ate this unit?
Check the system requirements.
• Are the mic input button and audio output buttons set
to display the current status in real time?
Select "Real time" for "Alarm status update mode" on
the [Basic] tab of the "Basic setup" page.
Operating
Instructions
21
Reference
pages
Cause/solution
Symptom