Network Operating Instructions Network Interface Unit WJ-NT314

Monitor images from multiple cameras
Images from multiple cameras can be displayed on a multi-screen. Images from 4 cameras can be displayed simul-
taneously. To display images on a multi-screen, it is necessary to register cameras in advance. 4 cameras can be
registered as a group and up to 4 groups (16 cameras) can be registered. (☞ page 33)
Important:
• Select "OFF" for both the user authentication and the host authentication of the network device to be registered.
• Only JPEG images can be displayed on a multi-screen. Audio will not be heard.
• Multi-screen is the function that is available using this unit.
When the power is turned off or the LAN cable is disconnected while displaying images, displaying images on a
multi-screen will become unavailable.
8
Step 1
Click one of the multi-screen buttons.
→ Images from the registered cameras will be displayed
on a 4-split screen.
q To display images on a single screen, click the [1]
button or [Live] button.
w Click a camera title. Live images from the camera
corresponding to the clicked camera title will be dis-
played on the "Live" page of the newly opened win-
dow.
*1 Operable by only users and hosts whose access
level is "1. Administrator"
*2 Only operable by users and hosts whose access
level is "1. Administrator" or "2. Camera control"
when "ON" is selected for "User authentication"
(☞ page 46) and "Host authentication" (☞ page 47).
*3 Operable by users and hosts who belong to the
access level selected for "Authentication" on the
[Audio] tab of the "Camera setup" page. (☞ page 32)
Refer to page 46 for further information about the
access level.
Important:
It is impossible to display images and to receive/
transmit audio between the unit and the PC when
the viewer software "Network Camera View3" is not
installed on the PC. (Refer to the operating instruc-
tions for descriptions of how to install.)
qw