User Manual

Iris (brightness) adjustment

Adjusts the lens iris of the camera.

Step 1

When displaying the images on a 4-screen, select the

desired cameras.

Step 2

Click the [Detail] button.

→ The "Camera control [Advanced]" panel will be

displayed. (☞ Page 46)

Step 3

Press the [–] or [+] button.

It is possible to reset the set brightness by clicking

the [Reset] button.

Auto mode function of the camera

Activate the auto function of the camera according to the settings of the camera.

Step 1

When displaying the images on a 4-screen, select the

desired cameras.

Step 2

Click the [Detail] button.

→ The "Camera control [Advanced]" panel will be

displayed. (☞ Page 46)

Step 3

Click the auto mode button [C] of the camera, and

select one of the following auto modes:

Auto track/ Auto pan/ Preset sequence/ Patrol

Step 4

Click the [Start] button to start the selected auto

mode function.

Note:

 • Clickthe[Stop]buttontoturnofftheautomode

function of the camera.

 • Refertotheoperatinginstructionsoftheconnect-

ed camera for further information about the auto

mode function of the camera.