Colors of Speakers When choosing speakers, it is important to consider the strucutre or wood quality of the building or the interior. As much as possible, Panasonic speakers have been designed to harmonize with a variety of interiors. Because building interiors tend to be predominantly white, we have used it as the standard underlying tone. To accentuate the mood of your interior, simply choose the most appropriate shade. Integrated White Off White (Munsell 10Y9/1) (Munsell 5Y8.
1 Concept 2 System Examples 3 Connections 4 Products 5 Block Diagrams CONCEPT P4 ~ P7 Booster Power Amplifier WA-BA240N (240W) Mixing Power Amplifier WA-MA120N (120W) Mixing Power Amplifier SYSTEM EXAMPLES WA-MA240N (240W) P8 ~ P15 Sound Message Unit WU-ZM001E WU-ZS001E Remote Microphone WR-201E CONNECTIONS Surveillance Unit TABLE OF CONTENTS P16 ~ P43 PRODUCTS P44 ~ P73 Remote Control Microphone WR-210AE BLOCK DIAGRAMS 2 P74 ~ P79 3
1 CONCEPT CONCEPT CONCEPT CONCEPT All-in-One Mixer and Amp CONCEPT SYSTEM EXAMPLES Background music and announcement transmission can be transmitted independently to any of three zones, with background music transmitted to one zone and announcements transmitted to another zone.
1 CONCEPT CONCEPT BASIC SYSTEM DIAGRAM BASIC SYSTEM DIAGRAM 1 Mixing Power Amplifier (WA-MA120N/240N) Connection CONCEPT CONCEPT Schematic diagram of Remote Microphone with Extension Unit (WU-RM205E) connected for announcements on 15 channels. The illustration in the broken line frame shows how to connect more than one Remote Microphones to Mixing Power Amplifier. Refer to this illustration for method of connecting up to 4 Remote Microphones.
2 SYSTEM EXAMPLES DEPARTMENT STORE Department Store Outline KEY POINT • Remote-controlled Microphone Connection • Cascade Connection Allows remote microphones to be used for individual, group, allat-once emergency, and simultaneous 2-channel broadcasts. Increases expansion capability to include all-zone broadcast to separate facilities. • Cascade Connection • 2-channel Broadcast Allows added amplifier capacity and additional speaker circuits. Transmit a message only to the zone that needs it.
2 SYSTEM EXAMPLES RESIDENCE SCHOOL Residence Outline School Outline KEY POINT • Remote-controlled Microphone Connection • Cascade Connection Allows remote microphones to be used for individual, group, allat-once emergency, and simultaneous 2-channel broadcasts. Normal: Transmits individually to specific amplifiers. Emergency: All-zone announcement. • Additional Amplifier Connection • Remote-controlled Microphone Connection When additional capacity is needed.
2 SYSTEM EXAMPLES SHOPPING CENTER Public Address Paging System • 2-channel Broadcast • Cascade Connection Allows added amplifier capacity and additional speaker circuits. A chime is built into the master amplifier unit. The optional Sound Message Unit supports configuration of systems for regular broadcasts or simple emergency announcements. Transmit a message only to the zone that needs it.
2 SYSTEM EXAMPLES COMPOUND BUILDING Compoumd Building Outline KEY POINT Public Address Paging System for whole facility Public Address Paging System • 2-channel Broadcast • 2-channel Broadcast Transmit a message only to the zone that needs it. Transmit a message only to the zone that needs it. • Cascade Connection • Cascade Connection Allows added amplifier capacity and additional speaker units. Allows added amplifier capacity and additional speaker circuits.
3 CONNECTIONS CONNECTIONS WA-MA120N/WA-MA240N INSTALLATION WA-MA120N/WA-MA240N 3 CONNECTIONS VOLTAGE SELECTOR switch • Before plugging the AC power plug into the mains, make sure the VOLTAGE SELECTOR switch on the back of the Amplifier is in the proper position. • The factory preset is 220 V to 240 V. The Amplifier will not operate correctly if the VOLTAGE SELECTOR is set to 220 V to 240 V while the AC voltage is 110 V to 120 V.
WA-MA120N/WA-MA240N WA-MA120N/WA-MA240N LINE1,2, INPUT2,3, REC OUT, INS IN/OUT Connections EMG, TEL PAGING, INPUT1 Connections • Use the connections shown below for a microphone or recording/playback equipment, effect device that is not equipped with activation control (no-voltage make contact). • For information about connecting INPUT1, refer to page 19.
CONNECTIONS WA-MA120N/WA-MA240N WA-MA120N/WA-MA240N Remote Microphone (WR-210AE) Connection Speaker Connection • Up to four Remote Microphone units can be connected. For multiple connections, priority connection between Remote Microphones is required. For more information, consult the operating instructions of the Remote Microphone. • Use the connections shown below for connecting high-impedance or low-impedance loudspeakers.
3 CONNECTIONS CONNECTIONS WA-MA120N/WA-MA240N WA-MA120N/WA-MA240N • For 2-channel broadcast announcement, connect the WA-BA240N as shown below.
CONNECTIONS WA-MA120N/WA-MA240N WA-MA120N/WA-MA240N Battery Connection Zone Expansion Connection • Make sure the external battery is a 24 V Lead Acid battery (or two 12 V batteries in series connection). Panasonic Corporation holds no responsibility for any Amplifier fault operation or other inconveniences resulting from using any other batteries except that indicated above. • Use the formula below to determine the battery capacity that is necessary to support the amount of operating time required.
3 CONNECTIONS CONNECTIONS WA-MA120N/WA-MA240N WA-MA120N/WA-MA240N 3 Normal operation from individual zone announcement device (BGM, non-priority microphone) Inter-area all-zone announcement from all-zone announcement device (priority microphone and remote control microphone, PBX, non-priority announcement device) Area 1 Area 1 Amplifier BGM Mixing Mixing BGM Built-in Power Amplifier Microphone To Area 1, Zone 1 to 3 speakers Important 1 Mixing Built-in Power Amplifier Amplifier (Area 2) Re
WA-BA240N WA-BA240N Line-level Equipment Connection Speaker Connection • Connect external devices (e.g. pre-amplifiers) to the LINE IN jack. The following illustration is a connection example with the Mixing Power Amplifier (WA-MA120N or WA-MA240N). • Be sure to use the gold plated plugs (accessories) when using the LINE IN jack and/or the LINE THRU jack. • Use the connections shown below for connecting high-impedance or low-impedance loudspeakers.
CONNECTIONS WA-BA240N WA-BA240N Battery Connection • Connecting power amplifier output for high-impedance loudspeakers as shown below makes it possible to expand the number of speakers through the Amplifier. • The following illustration is a connection example with the Mixing Power Amplifier (WA-MA120N or WA-MA240N). • Make sure the external battery is a 24 V Lead Acid battery (or two 12 V batteries in series connection).
3 CONNECTIONS CONNECTIONS WU-ZM001E WU-ZM001E 7. Replace the Amplifier's top cover. • Be sure to turn off power before connecting or configuring settings. Be sure to turn off the device supplying power to the Sound Message Unit. Leaving power supplied creates the risk of electric shock and damage to equipment. Heat sink Installing the Sound Message Unit to the mixing power amplifier and configuring connections 4. Put 3 wiring cables on the heat sink and keep them there.
CONNECTIONS WU-ZS001E 3 WU-ZS001E SURVEILLANCE I/F Connector Example Application: (1) – Switch Trigger/Status Indication SURVEILLANCE I/F Connector Example Application: (2) – Backup Amplifier Connection After connecting to an external line as shown below, the switches can be used to trigger various operations, while indicators can be used to determine the status of the amplifier.
3 CONNECTIONS CONNECTIONS WR-210AE WR-210AE 3 Mixing Power Amplifier (WA-MA120N/240N) Connection CONNECTIONS Refer to the following table to determine the number of Remote Microphones that can be connected to the PA systems. PA System Name Number of devices that can be connected Name Type Remote Microphone (WR-210AE) Extension Unit (WU-RM205E) Mixing Power Amplifier WA-MA120N 4 4* WA-MA240N 4 4* *A maximum of 4 Remote Microphones can be connected to each WR-210AE.
3 CONNECTIONS CONNECTIONS WR-210AE Individual Priority MEMO Amplifier Shielded pair cable PRIORITY COM OUT IN DC LIN OUT (0V) 0V 24V C H REC OUT 0 dBV DC LIN OUT (0V) 0V 24V C H PRIORITY COM REC OUT 0 dBV OUT IN Remote Microphone 2 Second priority (Slave 1) Refer to the Operating Instructions of the Mixing Power Amplifier for details.
CONNECTIONS WR-201E WR-201E CONNECTIONS Mixing Power Amplifier (WA-MA120N/240N) Connection-1 Connectable PA Systems Select -22 dBV (RM) with the switch 1 on the back of the Mixing Power Amplifier. Volume should be adjusted to the desired level using the Volume control [RM] knob 2 on the back of Mixing Power Amplifier (WA-MA120N/240N). Refer to the following table to determine the number of Remote Microphones that can be connected to the PA systems.
WR-201E WR-201E Mixing Power Amplifier (WA-MA120N/240N) Connection-2 Connections between Mixing Power Amplifiers Refer to previous page for "Mixing Power Amplifier (WA-MA120N/240N) Connection-1" and the illustration and set 1 and 2 as well. Refer to the Operating Instructions of the Mixing Power Amplifier for details.
4 PRODUCTS PRODUCTS WA-MA120N/WA-MA240N WA-MA120N/WA-MA240N 2-channel Broadcast Announcement SYSTEM EXAMPLES CONNECTIONS Zone 2 speaker BGM Zone 2 speaker (BGM cut) Zone 3 speaker BGM Zone 3 speaker (BGM cut) Zone 1 speaker BGM Zone 2 speaker Zone 3 speaker WA-MA240N (240 W) 2-channel broadcast announcement Zone 1 speaker 2-channel announcement BGM Zone 2 speaker BGM BGM Zone 3 speaker BGM 2-channel broadcast announcement to zone 1 only...
PRODUCTS 4 PRODUCTS WA-MA120N/WA-MA240N WA-MA120N/WA-MA240N Front View 3 4 5 12 11 6 13 DIMENSIONS CONCEPT CONCEPT MAJOR OPERATING CONTROLS & TERMINALS 4 15 8 7 18 29 1 SYSTEM EXAMPLES 9 10 14 17 16 17 * The illustration shows the WA-MA120N. The WA-MA240N is the same in both appearance and function.
4 PRODUCTS PRODUCTS WA-MA120N/WA-MA240N WA-MA120N/WA-MA240N 4 Model No.
4 PRODUCTS PRODUCTS WA-BA240N WA-BA240N MAJOR OPERATING CONTROLS & TERMINALS WA-BA240N CONNECTIONS The WA-BA240N is a 240 W output monaural power amplifier. It includes 100 V and 70 V outputs for high-impedance loudspeakers, as well as low-impedance loudspeaker output. Inputs include LINE IN and 100 V.
4 PRODUCTS PRODUCTS WA-BA240N WA-BA240N SPECIFICATIONS ADJUSTING INPUT VOLUME Power Source CONCEPT Power Amplifier (WA-MA120N, MA240N, etc.) for High-Impedance Loudspeakers Power Consumption (AC) 8A LINE OUT Line-level equipment, etc. • When line-level equipment is connected to LINE IN, use the LEVEL knob on the back of the Amplifier to adjust the volume to the desired level. • Input volume cannot be adjusted when power amplifier output is connected to 100 V.
4 PRODUCTS PRODUCTS WU-ZM001E WU-ZM001E EXPLANATION OF TERMINOLOGY SYSTEM EXAMPLES CONNECTIONS Amplifier This refers to the mixing power amplifier WA-MA120N/240N. Emergency message Special messages announced during emergency situations. There are two messages, EMG1 and EMG2. EMG1/EMG2 Messages announced in an event of emergency. EMG2 has a priority over EMG1. Voice message Message announced in an event of emergency.
PRODUCTS WU-ZM001E WU-ZM001E MAJOR OPERATING CONTROLS & TERMINALS RECORDING METHODS Front View Notes on recording • Sound data is recorded to the SD memory card. Do not remove the SD memory card during recording. • You can switch the time display between elapsed recorded time and remaining recording time by pressing the SCHEDULE switch while recording.
4 PRODUCTS PRODUCTS WU-ZM001E WU-ZM001E SOUND MESSAGE UNIT SUPPORT SOFTWARE • Use the SELECT dial to move between screens on the same level. Normal operation • Use the ENTER switch and the CANCEL switch to move between different levels.
4 PRODUCTS PRODUCTS WU-ZM001E 4 WU-ZM001E SPECIFICATIONS 206 mm (W) x 45 mm (H) x 124 mm (D) * Excluding protrusions. Weight (Approx.) 665 g Finish Panel: Gun metal coating Output level: -12 dBV, output level is adjustable Output impedance: 32 Ω unbalanced (load impedance: 32 Ω or higher) S/N quotient: 70 dB or higher Stereo: 3.
4 PRODUCTS PRODUCTS WU-ZS001E WU-ZS001E MAJOR OPERATING CONTROLS & TERMINALS SYSTEM EXAMPLES 1 CN101 Terminal 2 CN102 Terminal 3 CN103 Terminal 4 CN104 Terminal 5 DIP Switches PREFACE This Surveillance Unit is intended for installation on the WAMA120N/240N Mixing Power Amplifier (sold separately). Installation of the Surveillance Unit ensures system reliability and safety by detection of speaker line failures, as well as audio signal problems and abnormally high temperatures in the amplifier.
4 PRODUCTS PRODUCTS WU-ZS001E WU-ZS001E Pin Number Front of Unit SURVEILLANCE I/F SP LINE SETTING STATUS 5 AMBER-NO SETTING GREEN-SETTING COMPLETED RM DC /DC OUT T1AL 13 25 VOLTAGE SELECTOR 4 ZONE 3 2 1 GROUND FAULT RED-SHORT AMBER-OPEN AC IN POWER 1 SIGNAL GND ZONE1 SHORT Zone 1 short Check for short in wiring of Zone 1. 2 ZONE1 OPEN Zone 1 disconnection Check for disconnection in wiring of Zone 1. 3 ZONE2 SHORT Zone 2 short Check for short in wiring of Zone 2.
4 PRODUCTS PRODUCTS WU-ZS001E WU-ZS001E SPECIFICATIONS Power Rated Voltage 24 V DC (supplied internally by amplifier) Requirements Consumption Current Approximately 100 mA Fault Detection Line Short (When impedance is -50 % of reference impedance value) Disconnect (When impedance is +50 % of reference impedance value) 8 Grounding (When ground impedance value is 50 kΩ or less) Amplifier CONCEPT CONCEPT Front of Mixing Power Amplifier 4 Audio fault (When audio that is greater than the pilot
4 PRODUCTS PRODUCTS WR-210AE WR-210AE MAJOR OPERATING CONTROLS & TERMINALS Remote Control Microphone WR-210AE SYSTEM EXAMPLES SYSTEM EXAMPLES Front View CONCEPT CONCEPT 4 PRODUCTS This Remote Microphone is designed for use with public address (PA) systems. It supports both separate zone announcement and all-zone announcement capabilities. • Connecting an recording device to the Remote Microphone's REC OUT terminal makes it possible to record messages from the microphone.
4 PRODUCTS PRODUCTS WR-210AE SPECIFICATIONS 4 MEMO Power Supply Ambient Temperature Dimensions CONCEPT CONCEPT General 24 V DC, 45 mA or less (connection terminal) 0 °C - +45 °C 250 (W) mm x 55 (H) mm x 155 (D) mm (excluding projections and flexible microphone) Approx. 740 g {1.63 lbs} Top case: OA ivory color (Munsell value 5.5Y7.5/0.3 approximate color) Bottom case: Gray color (Munsell value N5.
4 PRODUCTS PRODUCTS WR-201E WR-201E SPECIFICATIONS Remote Microphone General WR-201E Power Supply Ambient Temperature Dimensions Weight Finishing CONCEPT CONCEPT 4 24 V DC, 45 mA or less (connection terminal) 0 °C - +45 °C 107 mm (W) x 55 mm (H) x 155 mm (D) (excluding projections and flexible microphone) Approx. 400 g {0.88 lbs} Top case: OA ivory color (Munsell value 5.5Y7.5/0.3 approximate colour) Bottom case: Gray color (Munsell value N5.
EMG CONT TEL CONT G + G + G + CLK + ADJ.
5 BLOCK DIAGRAMS BLOCK DIAGRAMS WA-BA240N 5 WU-ZM001E/WU-ZS001E WU-ZM001E Local BUS SDRAM Sirial IO 5 Parallel IO 4 BATT CN I/F between the Amplifier Digital Tr RTC P/S Digital Tr SERIAL IN S/P SERIAL OUT SERIAL CLK MCK,BCK,WCK SDT O SDT I DIP SW LED GIPO LCD I/F CODEC Rec Input MPX BUS CN CN PARALLEL I/O CPU 27MHz VCXO MUTE ( Tr ) Phones Output I2C SPI USB I/F SD I/F UART1 UART2 Announce Message Output CN CORE Board S/P 12 Reg 5V Reg 3.
WU-RM205E Modular Jack LINE INPUT SW (LOCK TYPE) ON AIR INDICATOR (GREEN) CHIME CALL SIGN SW (UNLOCK) MUTE CALL SIGN VOLUME LINE INPUT VOLUME MIC SW (LOCK TYPE) MIC VOLUME OPERATE INDICATOR (GREEN) REGULATOR +12V VOLTAGE CONTROL VOL CONT Modular Jack Modular Jack BLOCK DIAGRAMS STEREO MINI JACK MUTE SYSTEM EXAMPLES MUTE MUTE CALL SIGN CONTROL CONCEPT WR-201E PRODUCTS FLEXIBLE MIC CONNECTIONS WR-210AE/WU-RM205E CONNECTIONS PRODUCTS BLOCK DIAGRAMS SYSTEM EXAMPLES 78 FLEXIBLE M
Colors of Speakers When choosing speakers, it is important to consider the strucutre or wood quality of the building or the interior. As much as possible, Panasonic speakers have been designed to harmonize with a variety of interiors. Because building interiors tend to be predominantly white, we have used it as the standard underlying tone. To accentuate the mood of your interior, simply choose the most appropriate shade. Integrated White Off White (Munsell 10Y9/1) (Munsell 5Y8.