Operating instructions

-9-
ADJUSTMENT
1. Panning
The Panning table can be moved between the
guide lines.
2. Tilting the camera
The tilting angle is shown below.
Note: Uprighting the picture on the monitor screen
is usually necessary. (Refer to 3. Uprighting
the picture.)
S
U
P
E
R
D
Y
N
A
M
I
C
S
U
P
E
R
D
Y
N
A
M
I
C
OPEN
LOCK
4. Focusing
Precaution:
The focus adjustment should be done at
the same time as the camera angle adjust-
ment.
Lens holders
3. Uprighting the picture
Loosen the 2 lens holders and bring the pic-
ture in an upright position on the monitor
screen by turning the camera head.
Guide lines
Panning table
77.5° (max)
4-1. Loosen the zoom lock lever.
4-2. Set the angular field of view according to the
scene desired.
4-3. After setting the angular field of view, tighten
the zoom lock lever.
4-4. Loosen the focus lock lever.
OPEN
LOCK
Focus lock lever
Zoom lock lever
Focus ring