Operating instructions

-7-
Notes:
• If the camera body is not installed correctly in
the camera fixing bracket, the fall prevention
cap cannot be inserted.
• The camera body cannot be moved after the
fall prevention cap is installed.
• When you need to remove the camera body,
first remove the fall prevention cap.
OPEN
LOCK
OPEN
LOCK
2-3. Remove the dome cover from the camera by
turning it counterclockwise.
2-4. Match the slit in the camera fixing bracket with
the lock line on the camera, and mount the
camera onto the camera fixing bracket.
2-5. Turn the camera in the LOCK direction until the
lock tab of the camera fixing bracket meets the
lock line of the camera.
OPEN
LOCK
OPEN
LOCK
2-6. Attach the fall prevention cap on the lock tab
of the camera fixing bracket as shown below to
prevent the camera from falling down.
OPEN
LOCK
Slit
Lock
line
Lock tab
Lock line