Operating instructions

-11-
9. Program Menu Setting
a. Entering the Program Menu
a-1. Press the SHIFT Switch.
The LED on the SHIFT Switch will light.
a-2. Press PROG Switch more than 2 sec.
The LED on the PROG Switch lights and the following menu is displayed on the monitor screen.
• Program Menu • Preset Data Menu
• Controller Setup Menu
The following switches are used as the cursor in
the Program Menu.
a-3. To close the Program Menu, move the cursor to
the END position and press the Set Switch or
PROG Switch.
Note: Zoom/Iris, Focus Control Switches or
Joystick can function during setting the preset
position.
SHIFT
PROS
CAM
MENU
LED lights on
LED lights on
** Controller Set Up **
Cable Comp S
Alarm Time 60S
Alarm Display Off
Alarm Buzzer On
Switch Buzzer On
Return
** Program Menu **
Preset Data *
Controller Set Up *
End
** Preset Data **
Cam1:------------ *
Cam2:------------ *
Return
3
6
9
2
5
8
0
1
4
7
SET
HOME POSI
** Controller Set Up **
Cable Comp S
Alarm Time 60S
Alarm Display Off
Alarm Buzzer On
Switch Buzzer On
Return
** Program Menu **
Preset Data *
Controller Set Up *
End
d
• Controller Set Up Menu
• Controller Set Up Menu
b. Controller Set Up Menu
b-1. Move the cursor to Controller Set Up.
b-2. Press the Set Switch.
The Controller Set Up Menu is displayed on the
monitor screen.
Up Switch
Right Switch
Set Switch
Down Switch
Left Switch