Operating instructions

-12-
d. Menu Setting
1. Cable Compensation Setting
1-1. Move the cursor to “Cable Comp” by pressing the
Up / Down Switch.
1-2. Select the desired mode (S / M / L) by pressing
the Right / Left Switch.
2. Alarm Time(Self Return Time) Setting
2-1. Move the cursor to “Alarm Time” by pressing the
Up / Down Switch.
2-2. Set the desired time by pressing the Right / Left
Switch.
3. Alarm Display Setting
3-1. Move the cursor to “Alarm Display” by pressing
the Up / Down Switch.
3-2. Select the On / Off mode by pressing the Right /
Left Switch.
** Controller Set Up **
Cable Comp S
Alarm Time 60S
Alarm Display Off
Alarm Buzzer On
Switch Buzzer On
Return
SM L
0.5 1 2 59 60 65
120 115 70
1 sec. interval
5 sec. interval
** Controller Set Up **
Cable Comp S
Alarm Time 60 S
Alarm Display Off
Alarm Buzzer On
Switch Buzzer On
Return
** Controller Set Up **
Cable Comp S
Alarm Time 60S
Alarm Display Off
Alarm Buzzer On
Switch Buzzer On
Return
On Off
c. Controller Set Up Menu Description
The setable items are shown in the following.
Cable compensationCable Comp
S : The cable length is 0 m to 500 m or less.
M : The cable length is 500 m to 900 m or less.
L : The cable length is 900 m to 1200 m or less. (with 5C-2V)
Alarm Time Alarm operating time (Self return time) 0.5, 1, 2, ...60, 65, ...120 sec.
Alarm Display “Alarm” display on/off
ON : Display
OFF : No display
Alarm Buzzer Alarm buzzer on/off
ON : Buzzer on
OFF : Buzzer off
Switch Buzzer Switch buzzer on/off
ON : Buzzer on
OFF : Buzzer off