Installation Manual

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

CM595

Applying Foam Seal to Top of Vertical Exhaust Duct

• Measure and cut (2) pieces of 12.7mm x 25.4mm (0.5" x 1.0") and (2) pieces of 25.4mm x 25.4mm

(1.0" x 1.0") foam seal to match the length and width of the vertical exhaust duct.

• Attach foam seal to the top border of the vertical exhaust duct.

(2) 12.7mm x 25.4mm

(0.5" x 1.0") Foam Seals

(2) 25.4mm x 25.4mm

(1.0" x 1.0") Foam Seals

Page 11 of 14

Step 10