Installation Manual

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

CM595

Attaching Vertical Exhaust Duct to Cabinet

(For ease of installation a minimum of (2) persons are suggested for this assembly step)

• Determine front and rear of the vertical exhaust duct and cabinet.

• Carefully lift vertical exhaust duct and place over opening in the top of the cabinet.

• Secure vertical exhaust duct to cabinet with M5 x 10mm hex head screws.

• Note: Number of M5 x 10mm hex head screws required will vary depending on the width of the vertical

exhaust duct. Extra screws may remain.

M5 x 10mm Hex

Head Screws

Page 12 of 14

Top Front Panel

Front of Cabinet

Step 11

Note: Shorter Top

Flange is to the Rear of

the Cabinet.