Installation Manual

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

CM595

Adjust Height of Vertical Exhaust Duct

(For ease of installation a minimum of (2) persons are suggested for this assembly step)

• Loosen the (4) M8 x 12mm screws on the front and rear of the vertical exhaust duct.

• Slide the top half of the vertical exhaust duct up to required height.

• Tighten the (4) M8 x 12mm screws on the front and rear of vertical exhaust duct.

• Torque screws to 3.1 N/m (27 in/lbs) minimum.

(4) M8 x 12mm Button

Head Screws

Page 13 of 14

Step 12