Installation Manual

INSTALLATION INSTRUCTIONS
© Panduit Corp. 2012
CM595
E-mail:
[e-mail]
Phone:
866-405-6654
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
Attaching Ganging Brackets
• Remove (4) M5 x 12mm button head screws from the front and rear of the (2) vertical exhaust ducts you
will be ganging.
• Use these screws to attach the (2) ganging brackets to the (2) vertical exhaust ducts.
• Loosen horizontal adjustment brackets screws and adjust the horizontal adjustment brackets to close
any gaps between vertical exhaust ducts.
• Tighten screws.
(4) M5 x 12mm Button
Head Screws
(2) Ganging Brackets
Page 14 of 14
Step 13