Installation Manual
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2012
CM595
Page 5 of 14
Set Width of Horizontal Adjustment Brackets (For Single Vertical
Exhaust Duct Installation)
• Measure required side to side opening needed for the top of the vertical exhaust duct.
• Adjust horizontal adjustment brackets to match opening.
• Tighten horizontal adjustment bracket screws.
• NOTE: For more than one vertical exhaust duct, ganging bracket installation is required. (Ref. page 14)
Width of Opening
in Ceiling
Step 4