Cut Sheet

QuickNet
™
Small Diameter Trunk Cable
Assemblies OFNP and LSZH
SPECIFICATION SHEET
construction
Cable type:
Indoor Small Diameter Trunk
Cable
jacket ratings:
Plenum (OFNP) NFPA 262
Low Smoke Zero Halogen (LSZH)
IEC 60332-1 and IEC 60332-3C
Fiber types:
Singlemode: OS1/OS2 9/125µm
Multimode: OM3 50/125µm
OM4 50/125µm
Connector
types end ‘A’:
MPO Female or MPO Male
Fiber count:
12, 24
Polarity:
MPO – MPO: Method A or Method B
Jacket color:
OS1/OS2 Yellow
OM3 Aqua
OM4 Aqua
Connector
types, End ‘B’:
MPO Female or MPO Male
application
Allows system designers to tailor configuration, reach and breakout construction to application requirements; to minimize waste, optimize cable
management, speed deployment, improve flexibility and manageability for lower installation costs. Small diameter trunk cable assemblies use
30 - 40% less space which is ideal for high cable density applications.
technical information
Small Diameter Trunk Cable Assemblies allow for rapid deployment of high-density permanent links in a single
assembly for data center applications requiring quick infrastructure deployment, such as main, horizontal, and zone
distribution areas. These trunk cable assemblies optimize cable routing requirements to ensure efficient use of
pathway space and significantly reduce installation time and cost. QuickNet
™
Small Diameter Trunk Cable
Assemblies are built with modular MPO connectivity and provide compatibility, flexibility and system performance
in all permanent link applications. All small diameter trunk cable assemblies are factory terminated and tested to
deliver verified optical performance and reliability for improved network integrity. 10Gig versions provide 10 Gb/s
network performance up to 300 meters for OM3 and up to 550 meters for OM4 per IEEE 802.3ae 10 GbE
standard while maintaining compatibility with legacy systems.
physical properties
Cable outside diameter (OD):
12-fiber: 4.5mm
24-fiber: 5.4mm
Minimum bend radius:
Under load: 20 x Cable OD
Static: 10 x Cable OD
Cable tensile strength:
12-fiber: 440N
24-fiber: 660N
Cable compressive load:
10 N/mm
Cable flex:
25 cycles
Connector cable retention:
50N
Connector durability:
MPO – 500 mating cycles
Breakout
outside diameter:
3.0mm
Transition
outside diameter:
12-fiber: 10mm
24-fiber: 10mm
Pulling eye diameter:
12-fiber: 19mm
24-fiber: 23mm
Cable twist:
10 cycles
Breakout length:
1m
www.panduit.com
optical properties
Maximum cable
attenuation:
Singlemode: 1.0dB/km at
1310/1550nm
Multimode: 3.5dB/km at 850nm
1.5dB/km at 1300nm
Maximum
connector
insertion loss
(per mated pair):
Singlemode: 0.75dB
Multimode: 0.50dB
Minimum
connector
return loss:
Singlemode: 55dB
Multimode: OM3 30dB minimum
OM4 30dB minimum
environmental properties
Operating temperature:
0°C to + 70°C
(32°F to 158°F)
Storage and
shipping temperature:
-40°C to +70°C
(-40°F to 158°F)
Installation temperature:
-0°C to + 60°C
(32°F to 140°F)
standards
Meets or exceeds: ISO/IEC 11801, TIA/EIA-568-C.3, TIA-604-5
(FOCIS-5), TIC/EIA-568-C.1, GR-409-CORE,
ICEA S-83-596 RoHS Complaint