Component Guide

ManualsBrandsPanduit ManualsHeat Shrink Wire Marker LabelsHeat Shrink Label, Thermal Transfer, Military Grade, 3/16", White

Identiﬁcation Solutions

for Harsh Environments

Minimize downtime, installation time, and waste while

reducing Mean Time To Repair (MTTR).

Properly identifying products, premises,

and infrastructure can signiﬁcantly

reduce the time to troubleshoot and repair.

Without identifying components, wires/

cables, etc., troubleshooting becomes

a lengthy process of tracing and

identifying the speciﬁc source of a problem.

Conversely, by having components and

wires/cables clearly identiﬁed, technicians

can quickly go to the source of the

problem. In certain cases, a properly

identiﬁed infrastructure can save hours of

troubleshooting time – which can translate

into millions of dollars for critical

applications. This guide provides an

overview of Panduit identiﬁcation

solutions and how these products

enhance performance and productivity in

harsh environments.

Introduction

Using this Guide .................................. 2-3

Applications ..................................... 4-6

Key Selection Criteria

Legibility ........................................ 7

Adhesive Holding Power............................ 7

Temperature Resistance............................ 7

Chemical Resistance .............................. 8

Outdoor Durability ................................ 9

Fire Safety Properties.............................. 10

Product Selection Guides

Heat Shrink Labels ................................ 10-11

Self-Laminating Labels............................. 11

Marker Plates .................................... 12

Raised Panel Labels............................... 12

Solar Labels ..................................... 13

Safety Identiﬁcation ............................... 13-14

Permanent Identiﬁcation............................ 15

Hand-Held and Desktop Printers ..................... 16

Identiﬁcation Software ............................. 16

Industry Compliance

Compliance with Industry Standards.................. 16

Industrial

Oil Rigs

Reﬁneries

Chemical Plants

Natural Gas

Processing Plants

LNG Plants

Water Treatment

Facilities

Wind Farms

Solar

Nuclear

Mining

Ships

Submarines

Cell Towers

Telecommunications

Transportation

OEM

www.panduit.com

Summary of content (18 pages)

PAGE 1
Identification Solutions for Harsh Environments Minimize downtime, installation time, and waste while reducing Mean Time To Repair (MTTR). Properly identifying products, premises, and infrastructure can significantly reduce the time to troubleshoot and repair. Without identifying components, wires/ cables, etc., troubleshooting becomes a lengthy process of tracing and identifying the specific source of a problem.
PAGE 2
Introduction Using this Guide Applications This section includes product recommendations for typical applications; always verify product suitability based on specific requirements and key selection criteria Key Selection Criteria Utilize material and attribute charts to help select the Panduit products required to deliver superior performance in specific applications Select the appropriate printers and tools to reduce time required and to take advantage of our lowest installed cost solutions Consider Pand
PAGE 3
Heat Shrink Labels Panduit heat shrink labels, available in multiple colors, grades, and sizes, for single or double-sided printing, offer a durable wire and cable identification solution for harsh environments with patented, time-saving features.
PAGE 4
Applications Panduit offers a wide variety of identification systems to meet your specific application requirements. Common applications include: Wire and Cable Labeling Description: Products encounter some of the harshest environments such as high temperature, frigid cold, salt water, sand, radiation, and chemical corrosion. Selection of the right material of construction is a key design criterion.
PAGE 5
Cable Tray Identification Description: The design requirements for this application are very similar to cable and wire identification applications. In addition, the products are often in remote locations.
PAGE 6
Outdoor – Natural Gas Hydraulic Fracturing, Pumping Stations: Selection Criteria: Extreme UV resistance; strong holding power for rough, textured, and powder-coated surfaces Product Recommendations: • Raised Panel Labels and Over-laminates • Stainless Steel Marker Plates and Tags Solar Photovoltaic System Labeling Description: This labeling system is designed to meet required safety standards for PV installation labeling.
PAGE 7
Key Selection Criteria Legibility Identification is permanent immediately after printing and remains legible even when exposed to weather, chemicals, and abrasion. Contrasting text and background colors enhance the readability of legends in all lighting conditions. Adhesive Holding Power Peel Adhesion Force (pounds per inch) Strong, permanent adhesives ensure that vital identification stays affixed to industrial surfaces.
PAGE 8
Chemical Resistance ACIDS ALCOHOLS BASES CLEANER/DEGREASER DETERGENTS FUELS HYDRAULIC FLUID OILS ORGANIC SOLVENTS SALT SOLUTION WATER = Lowest recommendation OK = Good LP = Loss of Print MD = Material Disintegrates SF - Slight Fading 8 www.panduit.
PAGE 9
Outdoor Durability A reliable labeling solution for outdoor use is vital to customers in industries such as solar energy and utilities. Standard label materials are not designed to withstand the extreme exposure to UV light, moisture, and temperature fluctuations of an outdoor application. Panduit has many years of experience in designing, testing, and manufacturing labels and markers with special properties specifically for outdoor use.
PAGE 10
Fire Safety Properties In some applications, fire safety is a critical concern. For these environments, identification labels and markers with low-smoke emissions and no halogens are required. Panduit Halogen-Free, Heat Shrink Labels meet the strict requirements of BS6853; 1999 Vehicle Category 1a for burning behavior and toxic gas emissions. Additionally, Panduit flame-retardant, halogen-free marker plates meet UL Standard 224 with a VW-1 rating for flammability and AMS-DTL-23053/5C (Class 1 and Class 3).
PAGE 11
Halogen-Free Two-Sided Heat Shrink Labels Width Part Number Min. Cable O.D. Height In. mm In. mm H100X025HFT-2 1.00 25.4 0.25 6.4 H200X025HFT-2 2.00 50.8 0.25 6.4 H100X034HFT-2 1.00 25.4 0.34 8.6 H200X034HFT-2 2.00 50.8 0.34 8.6 H100X044HFT-2 1.00 25.4 0.44 11.1 H200X044HFT-2 2.00 50.8 0.44 11.1 H100X064HFT-2 1.00 25.4 0.64 16.2 H200X064HFT-2 2.00 50.8 0.64 16.2 H100X084HFT-2 1.00 25.4 0.84 21.3 H200X084HFT-2 2.00 50.8 0.84 21.3 H100X165HFT-2 1.
PAGE 12
Standard Marker Plates Part Number Color In. mm In. mm In. mm Std. Pkg. Qty. (Roll) M200X050Y7T M200X100Y7T M300X050Y7T M300X100Y7T White White White White 2.00 2.00 3.00 3.00 50.8 50.8 76.2 76.2 0.50 1.00 0.50 1.00 12.7 25.4 12.7 25.4 1.07 0.80 2.07 1.80 27.3 20.3 52.6 45.7 1 1 1 1 Width Area Width Length Additional colors at www.panduit.com. Halogen-Free Marker Plates Print-On Area In. mm In. mm In. mm In. mm Std. Pkg. Qty. (Roll) 2.00 2.00 2.00 2.00 50.8 50.8 50.8 50.
PAGE 13
Polyester and Reflective Labels for Solar Applications Color Application In. mm In. mm Std. Pkg. Qty. Inverter 1.50 38.1 3.00 76.2 50 Load Controller 1.50 38.1 3.00 76.2 50 PPS0204CSL1-C01 Black / Orange / White Black / Orange / White Black / Yellow Wiring or Enclosures 2.00 50.8 4.00 101.6 50 PPS0204CSL1-C02 Black / Yellow Breaker Panels, Pull Boxes 2.00 50.8 4.00 101.
PAGE 14
Safety Identification (continued) Width Part Number Header Legend PPS0710D75 DANGER HIGH VOLTAGE UNAUTHORIZED PERSONNEL KEEP OUT Color In. mm Red and Black/White 10.00 254.0 In. mm Std. Pkg. Qty. 7.00 177.8 1 10.00 254.0 1 Height Pre-Printed Rigid Polyethylene PRS0310F319 N/A FIRE EXTINGUISHER White/Red 3.50 PRS0710B364 N/A DANGER HIGH VOLTAGE Red/White 10.00 254.0 7.00 177.8 1 PRS0710D68 DANGER CABLE BURIED HERE HIGH VOLTAGE Red and Black/White 10.00 254.0 7.00 177.
PAGE 15
Permanent Identification Length Part Number Material Color In. Width mm Max. Recommended 3/16" Tie Cross (4.77mm) Section Characters Max. per Line Lines Standard Heavy In. mm 0.75 0.75 0.75 0.75 0.38 0.38 0.75 0.75 0.38 0.38 19.0 19.0 19.0 19.0 10.0 10.0 19.0 19.0 10.0 10.0 23 23 20 20 20 20 8 8 8 8 3 3 3 3 1 1 3 3 1 1 X X 0.75 0.75 0.75 0.75 N/A N/A N/A 19.0 19.0 19.0 19.
PAGE 16
Thermal Transfer Hand-Held Printers Part Number Std. Pkg. Qty.
PAGE 17
Industry Compliance (continued) Spec/Approval Requirement Products AMS-DTL-23053/5 Flame-resistant material. Continuous operating temperature range (Class 1 and 3) is -55C(-67F) to 135C(275F). Military Grade Heat Shrink Label AMS-DTL-23053/6 Flame-resistant material. Continuous operating temperature range (Class 1) is -55C(-67F) to 135C(275F). Fluid-Resistant Heat Shrink Label SAE-AS81531 (Rub Test) Print shall remain legible after 20 rubs with hard hand pressure.
PAGE 18
Compliance with Industry Standards Panduit identification solutions are engineered to meet the highest standards. Our products meet or exceed the most stringent industry standards including RoHS, UL, CSA, MIL, ASTM, NF, and many others. They also assist in compliance with OSHA, NEC, NFPA, TIA, and other requirements.