Component Guide

www.panduit.com
8
Chemical Resistance
The harshest environments often expose critical identification labels and markers to
chemical, fluids, and oils. Panduit materials, such as fluid-resistant heat shrink, are tested
to the highest industry standards against some of the most extreme chemicals.
Through this exhaustive research, Panduit products are the preferred solutions to meet
AMS-DTL-23053/6 Class 1 and NF F00-608 Class A & H, SAE-AS5942, MIL-STD-883F
Method 2015.13, Solutions A and D, and MIL-STD-202G Method 215K, Solutions A,
and D. These standards are particularly important for certain industries such as rail
transit, aerospace, and industrial construction.
Group
Marker Plate-Std [GMH2]
Marker Plate - Hal-Free [GMPU]
Marker Plate - High-Temp [GMNT]
Marker Plate - Stainless Steel
Heat Shrink Labels - Mil Grade [GMUHS31]
Heat Shrink Labels - Hal- Free [GMHSHF]
Heat Shrink Labels - Fluid Resist [GMUFR31]
Raised Panel Labels [GMH3]
Self-Lam - Vinyl [GMV16] Self-Lam - Vinyl [GMV17]
Self-Lam - PVDF [GMTD1]
Super-Tack Polyester Label/Tape [GMY4-HT]
Polyester Component Label [GMY4-W]
Continuous Vinyl Tape [GMV14]
Pipe Markers - Rigid Strap-on
Pipe Markers - Semi-Rigid Snap-on
Adhesive Polyester Signs and Labels -PPS [GMM]
Rigid Polyethylene Signs - PRS [GMPE1]
Pre-printed Red Reflective Polyester - Solar [GMRS]
Pre-printed Red Polyester - Solar [GMY4-HT]
Flag Labels - AJT [GMY4-F]
Custom Engraved Marker Plates [GMH7]
ACIDS
ALCOHOLS
BASES
CLEANER/DEGREASER
DETERGENTS
FUELS
HYDRAULIC FLUID
OILS
ORGANIC SOLVENTS
SALT SOLUTION
WATER
= Lowest recommendation = Acceptable with some chemicals = Highest recommendation
OK = Good
LP = Loss of Print
MD = Material Disintegrates
SF - Slight Fading