Technical Bulletin
Table Of Contents
- Heat Shrink Labels
- This specification is intended to outline the physical and chemical properties of Panduit’s GMUHS31 tubing material for wire identification and insulation purposes and include the following part numbers and printable material identifiers:
- Printable Material Suffixes
- Part Number Prefixes
- H*C
- H1T-B
- H*T
- H*T-2
- PRODUCT SPECIFICATIONS:
- *The chemical analysis method DM4110B (De-ionized Water Soluble Method) was performed to identify concentration of halogen *ions in this material that could potentially leach onto materials such as stainless steel and promote corrosion. This chemical analysis does not identify the concentrations of toxic gaseous effluents released by burning this material.
- Containment Spray Test Information Table
18900 Panduit Drive
Tinley Park, IL 60487
Customer Service: 800-777-3300
TDS:
Effective Date:
Revision:
GMUHS31
28NOV12
8
Technical Data Sheet
3.15 X 10
7
(365 days)
142 (61)
10 (69)
CHEMICAL/SOLVENT RESISTANCE:
Samples were thermal transfer printed with RMR*BL/RMER*BL/RHR*BL-S/RMR*WH/RMER*WH and
RMH*BL/RMEH*BL/RHH*BL-S ribbons. Test was conducted at room temperature. The samples were immersed in the specified
chemical reagents for 5 immersions using the following cycle: a 10 minute immersion time followed by a 30 minute recovery time.
Chemical Reagent
Visual Observation
Distilled water
No effect
Mineral Spirits
No effect
ASTM #3 Oil
No effect
Isopropyl Alcohol
No effect
Methanol
No effect
3% Alconox Detergent
No effect
10% Sodium Hydroxide Solution
No effect
10% Sulfuric Acid Solution
No effect
5% Sodium Chloride Solution
No effect
Freon TF
No effect
Super Agitene
No effect
Jet A Fuel
No effect
Arco Truslide 68
No effect
SAE 30 Motor Oil
No effect
APPROVALS:
UL Recognized: UL224
File Number: E205133
CSA Certified: C22.2 No. 198.1-06 File Number: 256205
LIMITED WARRANTY
All PANDUIT Identification Solution Products (except for Software programs) are warranted to be free from defects in material and workmanship
at the time of sale but our obligation under this warranty is limited to replacement of the product proved to be defective within 6 months from the
date of sale, or in the case of printers, within 90 days from the date of sale. This warranty is void if the products or printers are modified, altered
or misused in any way. Use of P
ANDUIT printers with any product other than the specified PANDUIT products for which the printer was designed
constitutes misuse. Before using, the user shall determine the suitability of the product for its intended use and user assumes all risk and
liability whatsoever in connection therewith. The foregoing may not be altered except by an agreement signed by officers or seller and
manufacturer.
NEITHER P
ANDUIT OR SELLER SHALL BE LIABLE FOR ANY OTHER INJURY, LOSS OR DAMAGE, WHETHER DIRECT OR
CONSEQUENTIAL, ARISING OUT OF THE USE OF, OR THE INABILITY TO USE THE PRODUCT OR THE PRINTER.
THIS WARRANTY IS MADE IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS OF PARTICULAR USE ARE SPECIFICALLY EXCLUDED.
The information contained in this literature is based on our experience to date and is believed to be reliable. It is intended as a guide or
use by persons having technical skill at their own discretion and risk. We do not guarantee favorable results or assume any liability in
connection with its use. Dimensions contained herein are for reference purposes only. This publication is not to be taken as a license to
operate under, or a recommendation to infringe any existing patents. This supersedes and voids all previous literature, etc.
Page 4 of 4 2008 PANDUIT Corp
TDS-GMUHS31