Cut Sheet

www.panduit.com
PanView iQ
™
(PViQ
™
) Interconnect
Patch Cords – Enhanced
SPECIFICATION SHEET
applications
Panduit’s PViQ
™
System Hardware, which
includes intelligent patch panels, modules and
cabling, seamlessly feeds information directly
into the Physical Infrastructure Manager (PIM
™
)
Software Platform to provide continuous real-time
patch field monitoring and visibility of physical
infrastructure connectivity for enhanced system
reliability, security and capacity management.
PViQ
™
Patch Panels support tiered installations to
provide customers with the flexibility of installing
passive connectivity that may be upgraded to fully
managed at a future time. PViQ
™
Interconnect Patch
Cords enable intelligent physical infrastructure
management for interconnect architectures by
verifying switch port connection and communicating
with the system software, to allow improved network
visibility. Interconnect patch cords can reduce patch
panel requirements by 50% over cross-connect
designs, reducing installation and deployment costs.
technical information
Category 6A/Class E
A
channel performance:
Certified channel performance in a 4-connector configuration up to 100
meters and exceeds the requirements of ANSI/TIA-568-C.2 Category
6A and ISO 11801 Class E
A
standards for supporting 10GBASE-T
transmission over twisted-pair cabling systems; attenuation de-rating
factor is 1.5
Certified component performance to the ANSI/TIA-568-C.2 component
standard for supporting 10GBASE-T transmission over twisted-pair
cabling systems
Cable diameter:
0.255 in. (6.5mm) nominal
Temperature rating:
14°F to 140°F (-10°C to 60°C) during operation
-40°F to 158°F (-40°C to 70°C) during storage
FCC and ANSI compliance:
Meets ANSI/TIA/EIA-1096-A; contacts plated with 50 microinches of
gold for superior performance
IEC compliance:
Meets IEC 60603-7
PoE compliance:
Meets requirements of IEEE 802.3af and IEEE 802.3at for
PoE applications
UL listed:
UL 1863
key features and benefits
Switch/server
port detection
Communicates connection status between switch/server and PViQ
™
Patch Panels
100% performance tested
Assurance that each patch cord will deliver the critical
electrical performance requirements
Integral pair manager
Optimizes performance and consistency by reducing untwist at the plug
Slender strain relief boot
Provides easy access in high-density applications
Patented tangle free latch
Prevents snags and provides easy release, saving time on frequent
moves, adds, and changes
Ninth conductor continuity
Provides continuity through the patch cord enabling the PanView iQ
™
System to monitor connectivity without interfering with
Ethernet performance
Variety of cable colors
and lengths
Meets individual length and color-coding requirements for greater
system flexibility
LED indicator and switch
LEDs aid in patch cord tracing and connectivity changes at the switch
end; they also identify unauthorized removals or insertions
specifications
Category 6A/Class E
A
UTP interconnect patch cords shall be constructed
of 26 AWG stranded copper cable with a PViQ
™
Patch Panel Plug on one
end and a LED switch modular plug on the other end. Copper conductors
in patch cable shall be twisted in pairs and separated by a quadrant
separator. All four pairs shall be surrounded by MaTriX tape. Additional
26 AWG conductors shall connect the LED switch plug to 9th and 10th
contacts on the PViQ
™
Patch Panel Plug. A flame retardant jacket will
cover all conductors. The MaTriX tape shall suppress alien crosstalk and
allow 10 Gb/s transmission. Patch cords shall be used in conjunction with
intelligent patch panels and exclusively for interconnect architectures.
PanView iQ
™
Interconnect Patch Cords –
Enhanced – UTP CM Rated
Foot lengths: PVQ-EUSDC3BU*
Meter lengths: PVQ-EUSDC1MBU^
PanView iQ
™
Interconnect Patch Cords –
Enhanced – STP CM/LSZH Rated
Foot lengths: PVQ-ES6X3BU*
Meter lengths: PVQ-ES6X1MBU^
PanView iQ
™
Interconnect Patch
Cords – CM Rated
Foot lengths: PVQ-BIU6C3BU*
Meter lengths: PVQ-BIU6C1MBU**
PanView iQ
™
Interconnect Patch
Cords – LSZH Rated
Meter lengths: PVQ-BIU6L1MBU^
PanView iQ
™
Patch Panels
Modular, intelligent, blank 24-port
Flat unshielded: PVQ-MIQPU24
Angled unshielded: PVQ-MIQAPU24
Flat shielded: PVQ-MIQPS24
Angled shielded: PVQ-MIQAPS24
PanView iQ
™
Intelligence Modules
Panel manager (PM): PVQ-PM
Expansion module
(EM): PVQ-EM
NOTE: PM requires PanViewiQ
™
Power Supply
(not included).
PanView iQ
™
Power Supply
12 volt power supply
(North America): PVQ-PS12VDC-S
(Europe): PVQ-PS12VDC-E
(UK): PVQ-PS12VDC-U
(Japan): PVQ-PS12VDC-J
(China): PVQ-PS12VDC-C
PIM
™
Software Platform and Modules
Base functionality
module: PIM-BASE
Connectivity management
module: PIM-CONNECT‡
Maintenance, support and warranty
agreement: PIM-CAMA
*For standard lengths other than 3 feet (5, 7, 10,
14, or 20) change the length designation in the
part number to the desired length. For standard
cable color other than BU (Blue), replace suffix
BU with WH (White) at the end of the part number.
For example, the part number for a white, 5-foot
UTP patch cord is PVQ-EUSDC5WH. For example,
the part number for a white, 5-foot STP patch
cord is PVQ-ES6X5WH.
^For standard lengths other than 1 meter (2, 3,
5 or 10) change the length designation in the part
number to the desired length. For standard cable
color other than BU (Blue), replace suffix BU with
WH (White) at the end of the part number. For
example, the part number for a white 2 meter
UTP patch cord is PVQ-ES6X2MWH. For example,
the part number for a white 2 meter STP patch
cord is PVQ-ES6X2MWH.
**For standard lengths other than 3 feet (5, 7, 10,
14, or 20) change the length designation in part
number to the desired length. For standard cable
colors other than BU (Blue) replace suffix BU with
GR (Green) at the end of the part number. For
example, the part number for a green 10-foot
CM patch cord is PVQ-BIU6C10GR.
***For standard lengths other than 1 meter (2, 3,
5, or 10) change the length designation in part
number to the desired length. For standard cable
colors other than BU (Blue) replace suffix BU with
GR (Green) at the end of the part number. For
example, the part number for a green 10-meter
CM patch cord is PVQ-BIU6C10MGR.
^^For standard lengths other than 1 meter (2, 3,
5, or 10) change the length designation in part
number to the desired length. For standard cable
colors other than BU (Blue), replace suffix BU
with WH (White) at the end of the part number.
For example, the part number for a white 10-meter,
LSZH patch cord is PVQ-BIU6L10MWH.
‡To order this module, add the appropriate letter
to the end of the part number, based on the size
of the installation: -S (<50 racks); -M (50-199
racks); -L (200-399 racks); -X (400+ racks). For
example, the part number for the Connectivity
Management Module for 250 racks
is PIM-CONNECT-L.