Acculink DSU/CSU Data Service Unit Models 3160-A4, 3161, 3164-A2, and 3165-A4 Operator's Guide

C. Configuration Options
C-28
March 2001 3160-A2-GB24-10
TnInActTm: Disab
Next Enab Disab Prev
Telnet Inactivity Timeout. Specifies whether the Telnet session disconnects after a period
of inactivity specified by the TnDiscTm configuration option.
Enab
– The Telnet session disconnects after the period of inactivity specified by the
TnDiscTm configuration option.
Disab
– The Telnet session does not disconnect due to inactivity.
TnDiscTm: 5
Next Up Down Save Prev
Telnet Disconnect Time. Specifies the period of time (1 to 60 minutes) before the Telnet
session disconnects due to inactivity. (The TnInActTm configuration option must be set to
Enab.) Use the left or right arrow key to position the cursor on the digit you want to
change. Use the Function keys (Up or Down) to increment or decrement the digit.
Up
– Increments the time delay.
Down
– Decrements the time delay.
Save
– Stores the time delay for use with inactivity disconnects.
Table C-7. User Interface Configuration Options (11 of 11)