Acculink DSU/CSU Data Service Unit Models 3160-A4, 3161, 3164-A2, and 3165-A4 Operator's Guide

4. Configuration

4-38

March 2001 3160-A2-GB24-10

7. From the DTE Channels screen, press F1 to select Assign.

8. Press the Function key below the network channel desired. Each time that you

press the Function key, the DTE channel number will scroll up one number. If

the network channel is currently unassigned (“-” is displayed on Line 2), the

DTE channel number initially displays the same number as the corresponding

network channel number. However, if the network channel is currently

assigned, the DTE channel number is shown as D

Pressing the Function key

for D24 wraps the display back to D1. Only those channels that are not already

assigned will appear on the LCD when scrolling. The network channels

assigned to ports (Prt1...Prt4) are unavailable for assignment.

Procedure

To specify DTE Drop/Insert (DSX-1) channels used to carry voice information,

1. Press from the channel allocation screen to return to the DTE Channels

screen.

2. From the DTE Channels screen, press F2 to select Voice.

F2 F3

DTE Channels:

Assign Voice

N1 N2 N3

D1 D2 –

F2 F3

N1 N2 N3

D1 D2 –

F2 F3

DTE Channels:

Assign Voice