Network Device User's Guide

vii
3166-A2-GB20-10
November 1998
About This Guide
Document Purpose and Intended Audience
This operator’s guide contains installation, operation, and maintenance
information for the ACCULINK 3166 Data Service Unit (DSU)/Channel Service
Unit (CSU).
It is assumed that you are familiar with the operation of digital data
communication equipment. You should also be familiar with Simple Network
Management Protocol (SNMP) if you want your DSU/CSU to be managed by an
SNMP manager.
Document Summary
Section Description
Chapter 1 Introduction. Describes the features of the DSU/CSU.
Chapter 2
Installation. Explains how to install the DSU/CSU.
Chapter 3
SDCP Operation. Explains the use of the optional Shared
Diagnostic Control Panel (SDCP), including using the SDCP
to configure SNMP parameters and security.
Chapter 4
Monitoring and Testing. Explains how to obtain information
about the status and performance of the DSU/CSU, how to
troubleshoot problems, and how to run tests.
Appendix A
SDCP Menu. Contains a menu tree showing the main
branches of the Shared Diagnostic Control Panel (SDCP)
interface.
Appendix B
Technical Specifications . Contains a table with the
specifications of the DSU/CSU.
Appendix C
Configuration Options. Lists and explains the configuration
options.
Appendix D
Pin Assignments. Describes the pin assignments for
connectors used with the DSU/CSU.