Router User's Guide

5. Advanced Setup
5-18 September 2005 6212-A2-GB23-00
If you want to specify the default gateway address, then uncheck the box as seen
below. Enter the default gateway address and, optionally, the WAN interface you
will use. Click on Save / Apply to save the settings.
If you add or change the default gateway address, you must reboot the router to
put the new default gateway IP address into effect.
Figure 5-32. Default Gateway Setup
Routing – Static Route
Use the Routing - Static Route screen to add a static route to the routing table.
Figure 5-33. Static Route Setup