Router User's Guide

5. Advanced Setup
5-22 September 2005 6212-A2-GB23-00
Modulation Methods
The following modulation methods are supported by the 6212 ADSL router:
 G.dmt Enabled
 G.lite Enabled
 T1.413 Enabled
 ADSL Enabled
 Annex L Enabled
 ADSL2+ Enabled.
Do not change this setting unless so directed by your ISP.
Phone Line Pair
The 6212 ADSL router supports phone lines on pins 2 and 3 or pins 1 and 4 to
connect your ADSL line. If your phone system uses pins 2 and 3, attach a normal
RJ11 cable to the router and select "Inner pair" on the screen; if your phone
system uses pins 1 and 4, attach the phone with the supplied RJ11 cable and
select "Outer pair" on the screen.
Capability
The following are included under Capability:
 Bitswap Enable
 SRA (Seamless Rate Adaptation) Enable
Do not change these settings unless so directed by your ISP.