Hotwire DSL Router User's Guide

C. Traps and MIBs
6300-A2-GB20-10 November 2003
C-7
Extension to Interfaces Table (RFC 1573)
This extension contains additional objects for the Interface table. Tab le C-4,
Extension to Interfaces Table, shows the objects supported.
Object Description Setting/Contents
ifInOctets
(ifEntry 10)
Input Counter objects that collect
input statistics on data received by
the interface.
Integer.
ifInUcastPkts
ifEntry 11)
ifInDiscards
(ifEntry 13)
ifInErrors
(ifEntry 14)
ifInUnknownProtos
(ifEntry 15)
ifOutOctets
(ifEntry 16)
Output Counter objects that
collect output statistics on data
received by the interface.
Integer.
ifOutUcastPkts
(ifEntry 17)
ifOutDiscards
(ifEntry 19)
ifOutErrors
(ifEntry 20)
Table C-3. Interfaces Group Objects (3 of 3)
Table C-4. Extension to Interfaces Table
Object Description Setting/Contents
ifName
(ifXEntry 1)
Provides the name of the
interface.
Specifies the interface name:
dsl1 – DSL interface.
eth1 – Ethernet interface.
ifHighSpeed
(ifXEntry 15)
Displays the downstream speed
for the DSL or Ethernet interface
in Mbps.
Depending on the current mode of operation,
displays the speed in 1 million bits per second
(Mbps) of the Ethernet interface as:
10 Mbps
100 Mbps
Due to the speed displaying as Mbps, the DSL
interface downstream speed displays as 0 (zero) for
IDSL and ReachDSL, 2 for SDSL, and 7 for RADSL.
ifConnector Present
(ifXEntry 17)
Indicates whether there is a
physical connector for the
interface.
The value for all interfaces is always:
true(1)