Hotwire DSL Router User's Guide

6300-A2-GB20-10 November 2003 A-1
A
Command Line Interface
Command Line Interface Capability
The Hotwire DSL router is managed with text commands from the Command Line
Interface (CLI). The CLI can be accessed:
 Locally with an ASCII terminal connected to the Console port, or
 Remotely via a Telnet session (through the management interface or from the
service domain).
The CLI is ASCII character-based and provides the capability to:
 Display the syntax of commands.
 Change the operational characteristics of the router by setting configuration
values.
 Restore all configuration values to the initial factory default settings.
 Display the router’s hardware and identification information.
 Display system status, including DSL link and Ethernet status.
 Display a sequence of commands that will set all configurable parameters to
their current value.
Refer to Appendix B, Configuration Defaults and Command Line Shortcuts.