Hotwire ReachDSL Modem Installation Instructions

Insert the supplied power cord’s round end into the jack labeled POWER. Plug the

transformer into an AC outlet.

The ReachDSL modem hardware installation is now complete. When the power cord is

installed, the ReachDSL modem goes through a power-on self-test.

Power-On

When power is applied, the ReachDSL modem performs self-diagnostics and the PWR

LED is on. The self-diagnostics includes a power-on self-test and all of the LEDs turn on

for one second.

PHONE LINE

ETHERNET

POW

01-17010

Power

Jack

Transformer

ReachDSL

TST

LINE ETHERNET

ALMPWR

TX/RX

01-17003

Power – green

Alarm – red

Test – yellow

Transmit/Receive – green

Ethernet Link – green

DSL Line – green